[Sun Jul 15 09:04:25 2012] Detection parameters:
  Position = (487.2, 310.2) = 16 13 3.40 -23 0 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.8 +/- 15.3
  Background counts = 19.6
  Rate = 0.002 +/- 0.0003

[Sun Jul 15 09:04:25 2012] Off-axis axis estimate = 13.71'
[Sun Jul 15 11:04:05 2012] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:04:05 2012] Initial guess for spatial extent in simple fitting = 13.29"
[Sun Jul 15 11:04:05 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.970
[Sun Jul 15 11:04:05 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 13.29"
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jul 15 11:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src15.csv
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jul 15 11:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src15.csv
[Sun Jul 15 11:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jul 15 11:58:57 2012] Fit fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Jul 15 12:58:26 2012] Spatial fit model total counts = 366.989000, observed total counts = 367.000000
[Sun Jul 15 12:58:26 2012] Offset between fit and detection position for source 15 = 0.362009 pixels
[Sun Jul 15 12:58:26 2012] 368.933600 total counts/ 289.171000 bgd. counts: snr = 4.690530
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.362009 pixels
  Position = (487.0, 310.5) = 16 13 3.48 -23 0 41.8
  Extent = 5.0 (4.1-6.3)", rotation angle = 0
  Source counts = 79.8 +/- 19.2
  Background counts = 289.2
  Rate = 0.001 +/- 0.0004
[Sun Jul 15 12:58:26 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 12:58:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 12:58:26 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 12:58:26 2012] Source does appear to be extended
[Sun Jul 15 12:58:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 15:01:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 15:01:09 2012] Initial guess for spatial extent in simple fitting = 5.03"
[Sun Jul 15 15:01:09 2012] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.094
[Sun Jul 15 15:01:09 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 5.03"
[Sun Jul 15 15:47:29 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jul 15 15:47:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src15.csv
[Sun Jul 15 15:47:29 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jul 15 15:47:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src15.csv
[Sun Jul 15 15:47:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 15:47:30 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jul 15 15:47:30 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jul 15 15:47:30 2012] Fit fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jul 15 16:44:56 2012] Warning, spatial fit 15 centroid is now closest to src. 3
[Sun Jul 15 16:44:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:44:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:44:56 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:44:56 2012] Source does appear to be extended
[Sun Jul 15 16:44:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 20:35:32 2012] XMMSAS src. selection expression = ellipse(42316.888160, 26965.147800, 301.657809, 301.657809, 0.000000, X, Y)
[Sun Jul 15 20:35:32 2012] Writing source region out to fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src15_src.reg
[Sun Jul 15 20:35:32 2012] Extracting stamp from image fullrun_mos1_xmm0109060201_pi300-10000_cl_sm2.00.img.gz, (470, 293) - (504, 328)
[Sun Jul 15 20:35:32 2012] XMMSAS bgd. selection expression = annulus(42316.888160, 26965.147800, 502.763014, 1005.526029, X, Y)
[Sun Jul 15 20:35:32 2012] Writing fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src15.gif
[Sun Jul 15 20:47:17 2012] Mean detx,y = (-3738.36, 14884.34) 
[Sun Jul 15 20:47:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 20:47:26 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 20:47:26 2012] Setting source spectrum file to fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jul 15 20:47:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Jul 15 21:15:33 2012] Not generating rmf since there are only 79 counts
[Sun Jul 15 21:15:33 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:30:13 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:30:13 2012] Error reading totcts from fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jul 15 22:30:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:30:13 2012] Using photon index=1.80, rate=0.0015, arf fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src15.arf
[Sun Jul 15 22:30:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:30:13 2012] Updating source flux to 3.9e-14
[Sun Jul 15 22:30:16 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting