[Tue May 14 01:00:32 2013] Detection parameters:
  Position = (375.5, 236.0) = 16 24 55.30 -24 22 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.1 +/- 12.9
  Background counts = 35.5
  Rate = 0.003 +/- 0.0005

[Tue May 14 01:00:32 2013] Off-axis axis estimate = 7.19'
[Tue May 14 01:01:06 2013] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Tue May 14 01:01:06 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Tue May 14 01:01:06 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.954
[Tue May 14 01:01:06 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 10.02"
[Tue May 14 01:01:08 2013] fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_src42.ximg exists
[Tue May 14 01:01:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_src42.csv
[Tue May 14 01:01:08 2013] fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue May 14 01:01:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_src42.csv
[Tue May 14 01:01:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:01:08 2013] fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue May 14 01:01:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue May 14 01:01:08 2013] fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue May 14 01:01:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue May 14 01:01:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:01:26 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 12.589528 pixels away
[Tue May 14 01:01:26 2013] Vigneting correction estimate = 1.000000
[Tue May 14 01:01:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 01:01:26 2013] Assessing source extent using major
[Tue May 14 01:01:26 2013] Source does appear to be extended
[Tue May 14 01:01:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:01:55 2013] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Tue May 14 01:01:55 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Tue May 14 01:01:55 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.954
[Tue May 14 01:01:55 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 10.02"
[Tue May 14 01:01:56 2013] fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_src41.ximg exists
[Tue May 14 01:01:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_src41.csv
[Tue May 14 01:01:56 2013] fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_src41_1.ximg exists
[Tue May 14 01:01:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_src41.csv
[Tue May 14 01:01:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:01:57 2013] fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Tue May 14 01:01:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Tue May 14 01:01:57 2013] fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Tue May 14 01:01:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Tue May 14 01:01:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:02:15 2013] Source 44 is offset by 7.132799 and -3.065145 pixels which is larger than
2 X fitted extent = 1.592253 x 2.503062, not incorporating fit results
[Tue May 14 01:02:15 2013] Vigneting correction estimate = 1.000000
[Tue May 14 01:02:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 01:02:15 2013] Assessing source extent using major
[Tue May 14 01:02:15 2013] Source does appear to be extended
[Tue May 14 01:02:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:02:42 2013] XMMSAS src. selection expression = ellipse(32618.279541, 20483.984543, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 01:02:42 2013] Not overwriting source region fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_src.reg
[Tue May 14 01:02:42 2013] Extracting stamp from image fullrun_pn_xmm0109060101_pi300-10000_cl_sm2.00.img.gz, (338, 199) - (413, 274)
[Tue May 14 01:02:42 2013] XMMSAS bgd. selection expression = annulus(32618.279541, 20483.984543, 1087.500000, 2175.000000, X, Y)
[Tue May 14 01:02:42 2013] Writing fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44.gif
[Tue May 14 01:02:51 2013] ../../xmm0109060101/products/events/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0109060101/products/events/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Tue May 14 01:02:52 2013] Mean detx,y = (4367.94, 8142.63) 
[Tue May 14 01:02:52 2013] ../../xmm0109060101/products/images/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_src.img and ../../xmm0109060101/products/images/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Tue May 14 01:02:52 2013] ../../xmm0109060101/products/spectra/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_src_b10.pi.gz and ../../xmm0109060101/products/spectra/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Tue May 14 01:02:52 2013] Setting source spectrum file to fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue May 14 01:02:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue May 14 01:02:52 2013] ../../xmm0109060101/products/lightcurves/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_src.lc and ../../xmm0109060101/products/lightcurves/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_bgd.lc exist, delete to re-create
[Tue May 14 01:03:04 2013] Not generating rmf since there are only 78 counts
[Tue May 14 01:03:04 2013] rmf not generated due to insufficient counts
[Tue May 14 01:03:04 2013] fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44.arf exists, delete to re-create
[Tue May 14 01:34:02 2013] Updating aperture counts using extracted products
[Tue May 14 01:34:02 2013] Total counts from fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 266.00
[Tue May 14 01:34:03 2013] Total counts from fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_bgd.pi.gz = 1377.00
[Tue May 14 01:34:03 2013] Got source and background scale factors 1159175.000000, 9145901.000000
[Tue May 14 01:34:03 2013] User source parameters:
  Position = (375.5, 236.0) = 16 24 55.30 -24 22 56.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 91.5 +/- 17.3
  Background aperture counts = 174.5
  Rate = 0.002 +/- 0.0004

[Tue May 14 01:34:03 2013] Updating counts from extracted products
[Tue May 14 01:34:03 2013] Set source signif. to 91.48/13.21 = 6.92
[Tue May 14 01:34:06 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 01:34:06 2013] Using photon index=1.80, rate=0.00197, arf fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44.arf
[Tue May 14 01:34:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 01:34:06 2013] Updating source flux to 1.1e-14
[Tue May 14 01:34:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 01:34:56 2013] xmm0109060101/analysis//spectral/fullrun_pn_xmm0109060101_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete