[Tue May 14 01:00:36 2013] Detection parameters:
  Position = (241.0, 240.0) = 16 25 38.10 -24 22 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.0 +/- 14.5
  Background counts = 12.1
  Rate = 0.005 +/- 0.0005

[Tue May 14 01:00:36 2013] Off-axis axis estimate = 5.94'
[Tue May 14 01:01:09 2013] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Tue May 14 01:01:09 2013] Initial guess for spatial extent in simple fitting = 9.40"
[Tue May 14 01:01:09 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.272
[Tue May 14 01:01:09 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.40"
[Tue May 14 01:01:10 2013] fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 14 01:01:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_src5.csv
[Tue May 14 01:01:10 2013] fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 14 01:01:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_src5.csv
[Tue May 14 01:01:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:01:11 2013] fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 14 01:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 14 01:01:11 2013] fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 14 01:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 14 01:01:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:01:38 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 16.712545 pixels away
[Tue May 14 01:01:38 2013] Vigneting correction estimate = 1.000000
[Tue May 14 01:01:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 01:01:38 2013] Assessing source extent using major
[Tue May 14 01:01:38 2013] Source does appear to be extended
[Tue May 14 01:01:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:01:59 2013] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Tue May 14 01:01:59 2013] Initial guess for spatial extent in simple fitting = 9.40"
[Tue May 14 01:01:59 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.272
[Tue May 14 01:01:59 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.40"
[Tue May 14 01:01:59 2013] fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 14 01:01:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_src5.csv
[Tue May 14 01:01:59 2013] fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 14 01:01:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_src5.csv
[Tue May 14 01:01:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:02:00 2013] fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 14 01:02:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 14 01:02:00 2013] fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 14 01:02:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 14 01:02:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:02:25 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 16.777120 pixels away
[Tue May 14 01:02:25 2013] Vigneting correction estimate = 1.000000
[Tue May 14 01:02:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 01:02:25 2013] Assessing source extent using major
[Tue May 14 01:02:25 2013] Source does appear to be extended
[Tue May 14 01:02:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:03:09 2013] XMMSAS src. selection expression = ellipse(20922.651138, 20831.695145, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 01:03:09 2013] Not overwriting source region fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_src.reg
[Tue May 14 01:03:09 2013] Extracting stamp from image fullrun_mos2_xmm0109060101_pi300-10000_cl_sm2.00.img.gz, (204, 203) - (279, 278)
[Tue May 14 01:03:10 2013] XMMSAS bgd. selection expression = annulus(20922.651138, 20831.695145, 1087.500000, 2175.000000, X, Y) && !ellipse(20033.717440, 22036.383000, 446.656013, 446.656013, 0.000000, X, Y)
[Tue May 14 01:03:10 2013] Writing fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17.gif
[Tue May 14 01:03:10 2013] ../../xmm0109060101/products/events/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0109060101/products/events/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Tue May 14 01:03:10 2013] Mean detx,y = (7129.31, -5647.46) 
[Tue May 14 01:03:10 2013] ../../xmm0109060101/products/images/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0109060101/products/images/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Tue May 14 01:03:10 2013] ../../xmm0109060101/products/spectra/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0109060101/products/spectra/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Tue May 14 01:03:10 2013] Setting source spectrum file to fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue May 14 01:03:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue May 14 01:03:10 2013] ../../xmm0109060101/products/lightcurves/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0109060101/products/lightcurves/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Tue May 14 01:23:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 14 01:23:39 2013] rmf not generated due to insufficient counts
[Tue May 14 01:34:15 2013] Updating aperture counts using extracted products
[Tue May 14 01:34:15 2013] Total counts from fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 193.00
[Tue May 14 01:34:15 2013] Total counts from fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 519.00
[Tue May 14 01:34:15 2013] Got source and background scale factors 1100472.000000, 9163075.000000
[Tue May 14 01:34:15 2013] User source parameters:
  Position = (241.0, 240.0) = 16 25 38.10 -24 22 37.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 130.7 +/- 14.9
  Background aperture counts = 62.3
  Rate = 0.003 +/- 0.0003

[Tue May 14 01:34:15 2013] Updating counts from extracted products
[Tue May 14 01:34:15 2013] Set source signif. to 130.67/7.90 = 16.55
[Tue May 14 01:34:18 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 01:34:18 2013] Using photon index=1.80, rate=0.00266, arf fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17.arf
[Tue May 14 01:34:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 01:34:18 2013] Updating source flux to 5.1e-14
[Tue May 14 01:34:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 01:34:37 2013] xmm0109060101/analysis//spectral/fullrun_mos2_xmm0109060101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete