[Tue May 14 01:00:33 2013] Detection parameters:
  Position = (411.1, 228.2) = 16 24 43.94 -24 23 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.4 +/- 9.5
  Background counts = 10.9
  Rate = 0.001 +/- 0.0002

[Tue May 14 01:00:34 2013] Off-axis axis estimate = 9.63'
[Tue May 14 01:01:08 2013] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Tue May 14 01:01:08 2013] Initial guess for spatial extent in simple fitting = 11.24"
[Tue May 14 01:01:08 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.946
[Tue May 14 01:01:08 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 11.24"
[Tue May 14 01:01:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src13.ximg exists
[Tue May 14 01:01:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src13.csv
[Tue May 14 01:01:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue May 14 01:01:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src13.csv
[Tue May 14 01:01:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:01:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue May 14 01:01:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue May 14 01:01:09 2013] Fit fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue May 14 01:01:31 2013] Spatial fit model total counts = 123.663000, observed total counts = 115.000000
[Tue May 14 01:01:31 2013] Offset between fit and detection position for source 14 = 0.430525 pixels
[Tue May 14 01:01:31 2013] 125.400800 total counts/ 83.911900 bgd. counts: snr = 4.529186
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.430525 pixels
  Position = (411.3, 228.7) = 16 24 43.91 -24 23 27.5
  Extent = 6.6 (5.0-9.6)", rotation angle = 0
  Source counts = 41.5 +/- 11.2
  Background counts = 83.9
  Rate = 0.0008 +/- 0.0002
[Tue May 14 01:01:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 01:01:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 01:01:31 2013] Assessing source extent using major axis lower bound
[Tue May 14 01:01:31 2013] Source does appear to be extended
[Tue May 14 01:01:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:01:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 01:01:57 2013] Initial guess for spatial extent in simple fitting = 6.60"
[Tue May 14 01:01:57 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.982
[Tue May 14 01:01:57 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 6.60"
[Tue May 14 01:01:58 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src12.ximg exists
[Tue May 14 01:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src12.csv
[Tue May 14 01:01:58 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue May 14 01:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src12.csv
[Tue May 14 01:01:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:01:59 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue May 14 01:01:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue May 14 01:01:59 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue May 14 01:01:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue May 14 01:01:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:02:20 2013] Warning, spatial fit 12 centroid is now closest to src. 2
[Tue May 14 01:02:20 2013] Vigneting correction estimate = 1.000000
[Tue May 14 01:02:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 01:02:20 2013] Assessing source extent using major axis lower bound
[Tue May 14 01:02:20 2013] Source does appear to be extended
[Tue May 14 01:02:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:03:04 2013] XMMSAS src. selection expression = ellipse(35731.039800, 19844.819800, 396.168011, 396.168011, 0.000000, X, Y)
[Tue May 14 01:03:04 2013] Not overwriting source region fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_src.reg
[Tue May 14 01:03:04 2013] Extracting stamp from image fullrun_mos1_xmm0109060101_pi300-10000_cl_sm2.00.img.gz, (388, 206) - (434, 251)
[Tue May 14 01:03:04 2013] XMMSAS bgd. selection expression = annulus(35731.039800, 19844.819800, 660.280019, 1320.560038, X, Y)
[Tue May 14 01:03:04 2013] Writing fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14.gif
[Tue May 14 01:03:05 2013] ../../xmm0109060101/products/events/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0109060101/products/events/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Tue May 14 01:03:05 2013] Mean detx,y = (-9264.76, 7056.73) 
[Tue May 14 01:03:05 2013] ../../xmm0109060101/products/images/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_src.img and ../../xmm0109060101/products/images/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Tue May 14 01:03:05 2013] ../../xmm0109060101/products/spectra/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0109060101/products/spectra/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Tue May 14 01:03:05 2013] Setting source spectrum file to fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May 14 01:03:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue May 14 01:03:05 2013] ../../xmm0109060101/products/lightcurves/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0109060101/products/lightcurves/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Tue May 14 01:03:09 2013] Not generating rmf since there are only 41 counts
[Tue May 14 01:03:09 2013] rmf not generated due to insufficient counts
[Tue May 14 01:03:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14.arf exists, delete to re-create
[Tue May 14 01:34:10 2013] Updating aperture counts using extracted products
[Tue May 14 01:34:10 2013] Total counts from fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 62.00
[Tue May 14 01:34:10 2013] Total counts from fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 181.00
[Tue May 14 01:34:10 2013] Got source and background scale factors 419528.000000, 3287480.000000
[Tue May 14 01:34:10 2013] User source parameters:
  Position = (411.3, 228.7) = 16 24 43.91 -24 23 27.5
  Extent = 6.6 (5.0-9.6)", rotation angle = 0
  Source aperture counts = 38.9 +/- 8.9
  Background aperture counts = 23.1
  Rate = 0.0008 +/- 0.0002

[Tue May 14 01:34:13 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 01:34:13 2013] Using photon index=1.80, rate=0.000845, arf fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14.arf
[Tue May 14 01:34:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 01:34:13 2013] Updating source flux to 1.9e-14
[Tue May 14 01:34:21 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 01:34:31 2013] xmm0109060101/analysis//spectral/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete