[Tue May 14 01:00:33 2013] Detection parameters: Position = (230.9, 254.0) = 16 25 41.32 -24 21 37.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 146.0 +/- 15.6 Background counts = 11.7 Rate = 0.005 +/- 0.0005 [Tue May 14 01:00:34 2013] Off-axis axis estimate = 5.86' [Tue May 14 01:01:08 2013] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting [Tue May 14 01:01:08 2013] Initial guess for spatial extent in simple fitting = 9.36" [Tue May 14 01:01:08 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.280 [Tue May 14 01:01:08 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.36" [Tue May 14 01:01:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src4.ximg exists [Tue May 14 01:01:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src4.csv [Tue May 14 01:01:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src4_1.ximg exists [Tue May 14 01:01:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src4.csv [Tue May 14 01:01:09 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 14 01:01:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Tue May 14 01:01:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Tue May 14 01:01:09 2013] Fit fullrun_mos1_xmm0109060101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Tue May 14 01:01:31 2013] Spatial fit model total counts = 260.000000, observed total counts = 260.000000 [Tue May 14 01:01:31 2013] Offset between fit and detection position for source 12 = 0.251831 pixels [Tue May 14 01:01:31 2013] 261.399000 total counts/ 155.427000 bgd. counts: snr = 8.500176 Spatial fit parameters: Offset between fit and detection position for source 12 = 0.251831 pixels Position = (231.2, 254.0) = 16 25 41.25 -24 21 37.3 Extent = 6.2 (4.9-7.9)", rotation angle = 0 Source counts = 106.0 +/- 16.2 Background counts = 155.4 Rate = 0.002 +/- 0.0003 [Tue May 14 01:01:31 2013] Vigneting correction estimate = 1.000000 [Tue May 14 01:01:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 14 01:01:31 2013] Assessing source extent using major axis lower bound [Tue May 14 01:01:31 2013] Source does appear to be extended [Tue May 14 01:01:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 14 01:01:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 14 01:01:57 2013] Initial guess for spatial extent in simple fitting = 6.20" [Tue May 14 01:01:57 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.078 [Tue May 14 01:01:57 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.20" [Tue May 14 01:01:58 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src3.ximg exists [Tue May 14 01:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src3.csv [Tue May 14 01:01:58 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src3_1.ximg exists [Tue May 14 01:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src3.csv [Tue May 14 01:01:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 14 01:01:58 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Tue May 14 01:01:58 2013] fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Tue May 14 01:01:58 2013] Fit fullrun_mos1_xmm0109060101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Tue May 14 01:02:20 2013] Spatial fit model total counts = 259.912000, observed total counts = 260.000000 [Tue May 14 01:02:20 2013] Offset between fit and detection position for source 12 = 0.016188 pixels [Tue May 14 01:02:20 2013] 261.297000 total counts/ 154.775000 bgd. counts: snr = 8.562270 Spatial fit parameters: Offset between fit and detection position for source 12 = 0.016188 pixels Position = (231.2, 254.0) = 16 25 41.24 -24 21 37.3 Extent = 6.3 (4.9-7.9)", rotation angle = 0 Source counts = 106.5 +/- 16.2 Background counts = 154.8 Rate = 0.002 +/- 0.0003 [Tue May 14 01:02:20 2013] Vigneting correction estimate = 1.000000 [Tue May 14 01:02:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 14 01:02:20 2013] Assessing source extent using major axis lower bound [Tue May 14 01:02:20 2013] Source does appear to be extended [Tue May 14 01:02:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 14 01:03:04 2013] XMMSAS src. selection expression = ellipse(20063.867640, 22051.221600, 375.250211, 375.250211, 0.000000, X, Y) [Tue May 14 01:03:04 2013] Not overwriting source region fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_src.reg [Tue May 14 01:03:04 2013] Extracting stamp from image fullrun_mos1_xmm0109060101_pi300-10000_cl_sm2.00.img.gz, (210, 232) - (253, 276) [Tue May 14 01:03:04 2013] XMMSAS bgd. selection expression = annulus(20063.867640, 22051.221600, 625.417018, 1250.834036, X, Y) && !ellipse(20920.805893, 20835.254211, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 14 01:03:04 2013] Writing fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12.gif [Tue May 14 01:03:05 2013] ../../xmm0109060101/products/events/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0109060101/products/events/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create [Tue May 14 01:03:05 2013] Mean detx,y = (-4052.60, -7855.83) [Tue May 14 01:03:05 2013] ../../xmm0109060101/products/images/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_src.img and ../../xmm0109060101/products/images/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create [Tue May 14 01:03:05 2013] ../../xmm0109060101/products/spectra/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0109060101/products/spectra/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create [Tue May 14 01:03:05 2013] Setting source spectrum file to fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_src_b10.pi.gz [Tue May 14 01:03:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_bgd.pi.gz [Tue May 14 01:03:05 2013] ../../xmm0109060101/products/lightcurves/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0109060101/products/lightcurves/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create [Tue May 14 01:03:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12.rmf exists, delete to re-create [Tue May 14 01:03:09 2013] fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12.arf exists, delete to re-create [Tue May 14 01:34:07 2013] Updating aperture counts using extracted products [Tue May 14 01:34:07 2013] Total counts from fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 149.00 [Tue May 14 01:34:07 2013] Total counts from fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 173.00 [Tue May 14 01:34:07 2013] Got source and background scale factors 438400.000000, 2798372.000000 [Tue May 14 01:34:07 2013] User source parameters: Position = (231.2, 254.0) = 16 25 41.24 -24 21 37.3 Extent = 6.3 (4.9-7.9)", rotation angle = 0 Source aperture counts = 121.9 +/- 13.2 Background aperture counts = 27.1 Rate = 0.002 +/- 0.0003 [Tue May 14 01:34:12 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 14 01:34:12 2013] Using photon index=1.80, rate=0.00217, arf fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12.arf [Tue May 14 01:34:12 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 14 01:34:12 2013] Updating source flux to 4.5e-14 [Tue May 14 01:34:31 2013] xmm0109060101/analysis//spectral/fullrun_mos1_xmm0109060101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete