[Sun Sep 25 10:12:34 2011] Detection parameters:
  Position = (409.1, 314.0) = 8 19 58.78 21 6 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.5 +/- 11.8
  Background counts = 7.0
  Rate = 0.004 +/- 0.0005

[Sun Sep 25 10:12:34 2011] Off-axis axis estimate = 8.11'
[Sun Sep 25 11:26:29 2011] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:26:29 2011] Initial guess for spatial extent in simple fitting = 10.48"
[Sun Sep 25 11:26:29 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.063
[Sun Sep 25 11:26:29 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 10.48"
[Sun Sep 25 11:50:17 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src4.ximg exists
[Sun Sep 25 11:50:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src4.csv
[Sun Sep 25 11:50:17 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Sep 25 11:50:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src4.csv
[Sun Sep 25 11:50:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:50:17 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Sep 25 11:50:17 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Sep 25 11:50:17 2011] Fit fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Sep 25 11:50:29 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.600761 pixels away
[Sun Sep 25 11:50:29 2011] Source 4 is offset by 3.128503 and 8.651399 pixels which is larger than
2 X fitted extent = 1.171076 x 1.171076, not incorporating fit results
[Sun Sep 25 11:50:29 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:50:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:50:29 2011] Assessing source extent using major
[Sun Sep 25 11:50:29 2011] Source does appear to be extended
[Sun Sep 25 11:50:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 12:42:05 2011] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 12:42:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 12:42:05 2011] Initial guess for spatial extent in simple fitting = 10.48"
[Sun Sep 25 12:42:05 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.063
[Sun Sep 25 12:42:05 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 10.48"
[Sun Sep 25 12:59:21 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src4.ximg exists
[Sun Sep 25 12:59:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src4.csv
[Sun Sep 25 12:59:21 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Sep 25 12:59:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src4.csv
[Sun Sep 25 12:59:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 12:59:21 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Sep 25 12:59:21 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Sep 25 12:59:21 2011] Fit fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Sep 25 12:59:32 2011] Warning, spatial fit 4 centroid is now closest to src. 12
[Sun Sep 25 12:59:32 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 12:59:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 12:59:32 2011] Assessing source extent using major
[Sun Sep 25 12:59:32 2011] Source does appear to be extended
[Sun Sep 25 12:59:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:38:40 2011] XMMSAS src. selection expression = ellipse(35546.731720, 27271.241699, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 14:38:40 2011] Writing source region out to fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src4_src.reg
[Sun Sep 25 14:38:40 2011] Extracting stamp from image fullrun_mos2_xmm0108860501_pi300-10000_cl_sm2.00.img.gz, (372, 277) - (447, 352)
[Sun Sep 25 14:38:40 2011] XMMSAS bgd. selection expression = annulus(35546.731720, 27271.241699, 1087.500000, 2175.000000, X, Y) && !ellipse(34935.586456, 25666.714569, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 14:38:40 2011] Writing fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src4.gif
[Sun Sep 25 14:39:11 2011] Mean detx,y = (10854.39, -473.18) 
[Sun Sep 25 14:39:11 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 14:39:16 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 14:39:16 2011] Setting source spectrum file to fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Sep 25 14:39:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Sep 25 14:48:09 2011] Not generating rmf since there are only 87 counts
[Sun Sep 25 14:48:09 2011] rmf not generated due to insufficient counts
[Sun Sep 25 14:48:59 2011] Updating aperture counts using extracted products
[Sun Sep 25 14:48:59 2011] Error reading totcts from fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Sep 25 14:48:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 14:48:59 2011] Using photon index=1.80, rate=0.00405, arf fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src4.arf
[Sun Sep 25 14:48:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 14:48:59 2011] Updating source flux to 8.3e-14
[Sun Sep 25 14:49:23 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting