[Sun Sep 25 10:12:34 2011] Detection parameters:
  Position = (290.7, 274.9) = 8 20 35.60 21 4 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 554.0 +/- 29.0
  Background counts = 15.2
  Rate = 0.03 +/- 0.001

[Sun Sep 25 10:12:34 2011] Off-axis axis estimate = 1.80'
[Sun Sep 25 11:26:29 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:26:29 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Sun Sep 25 11:26:29 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Sun Sep 25 11:26:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Sun Sep 25 11:50:17 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep 25 11:50:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 11:50:17 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep 25 11:50:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 11:50:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:50:17 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 11:50:17 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 11:50:17 2011] Fit fullrun_mos2_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 11:50:29 2011] Spatial fit model total counts = 888.748000, observed total counts = 888.000000
[Sun Sep 25 11:50:29 2011] Offset between fit and detection position for source 2 = 0.182453 pixels
[Sun Sep 25 11:50:29 2011] 898.755000 total counts/ 335.773000 bgd. counts: snr = 30.723566
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.182453 pixels
  Position = (290.8, 274.7) = 8 20 35.58 21 4 4.2
  Extent = 10.1 (9.4-11.1)", rotation angle = 0
  Source counts = 563.0 +/- 30.0
  Background counts = 335.8
  Rate = 0.03 +/- 0.001
[Sun Sep 25 11:50:29 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:50:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:50:29 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:50:29 2011] Source does appear to be extended
[Sun Sep 25 11:50:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 12:42:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 12:42:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 12:42:05 2011] Initial guess for spatial extent in simple fitting = 10.11"
[Sun Sep 25 12:42:05 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.128
[Sun Sep 25 12:42:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.11"
[Sun Sep 25 12:59:21 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Sep 25 12:59:21 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Sep 25 12:59:21 2011] Fit fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Sep 25 12:59:21 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 12:59:21 2011] fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 12:59:21 2011] Fit fullrun_mos2_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 12:59:32 2011] Spatial fit model total counts = 1012.820000, observed total counts = 1013.000000
[Sun Sep 25 12:59:32 2011] Offset between fit and detection position for source 2 = 0.044898 pixels
[Sun Sep 25 12:59:32 2011] 1020.740000 total counts/ 424.206000 bgd. counts: snr = 28.963217
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.044898 pixels
  Position = (290.8, 274.7) = 8 20 35.56 21 4 4.2
  Extent = 11.7" x 9.6", rotation angle = 49
  Source counts = 596.5 +/- 31.9
  Background counts = 424.2
  Rate = 0.03 +/- 0.002
[Sun Sep 25 12:59:32 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 12:59:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 12:59:32 2011] Assessing source extent using major
[Sun Sep 25 12:59:32 2011] Source does appear to be extended
[Sun Sep 25 12:59:32 2011] Computing asymmetry using major and minor axis, asym = 1.22
[Sun Sep 25 14:38:40 2011] XMMSAS src. selection expression = ellipse(25253.566200, 23853.401800, 700.812020, 573.246016, 49.494366, X, Y)
[Sun Sep 25 14:38:40 2011] Writing source region out to fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2_src.reg
[Sun Sep 25 14:38:40 2011] Extracting stamp from image fullrun_mos2_xmm0108860501_pi300-10000_cl_sm2.00.img.gz, (251, 234) - (331, 315)
[Sun Sep 25 14:38:40 2011] XMMSAS bgd. selection expression = annulus(25253.566200, 23853.401800, 1168.020034, 2336.040067, X, Y) && !ellipse(24689.764679, 24587.657562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24356.893036, 23736.978210, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 14:38:40 2011] Writing fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2.gif
[Sun Sep 25 14:38:41 2011] Mean detx,y = (32.31, 180.96) 
[Sun Sep 25 14:38:42 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 14:38:47 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 14:38:47 2011] Setting source spectrum file to fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Sep 25 14:38:47 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Sep 25 14:48:59 2011] Updating aperture counts using extracted products
[Sun Sep 25 14:48:59 2011] Error reading totcts from fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Sep 25 14:48:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 14:48:59 2011] Using photon index=1.80, rate=0.0281, arf fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2.arf
[Sun Sep 25 14:48:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 14:48:59 2011] Updating source flux to 3.1e-13
[Sun Sep 25 14:49:37 2011] Reading fit data from xmm0108860501/analysis//spectral/fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2_pl.csv
[Sun Sep 25 14:49:37 2011] Spectral fit parameter nH value = 8.75742e+21
[Sun Sep 25 14:49:37 2011] Spectral fit parameter PhoIndex value = 6.79905
[Sun Sep 25 14:49:37 2011] Failed to get F(0.3-8.0) from xmm0108860501/analysis//spectral/fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 14:49:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 14:49:37 2011] Using Nh = 8.8e+21, photon index=6.80, rate=0.0281, arf fullrun_mos2_xmm0108860501_pi300-10000_pass1_cl_src2.arf
[Sun Sep 25 14:49:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 14:49:37 2011] Updating source flux to 1.8e-13