[Sun Sep 25 10:12:13 2011] Detection parameters:
  Position = (290.8, 274.9) = 8 20 35.57 21 4 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 632.4 +/- 31.3
  Background counts = 16.5
  Rate = 0.03 +/- 0.001

[Sun Sep 25 10:12:13 2011] Off-axis axis estimate = 1.79'
[Sun Sep 25 11:00:18 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:00:18 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Sun Sep 25 11:00:18 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Sun Sep 25 11:00:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Sun Sep 25 11:26:29 2011] fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep 25 11:26:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 11:26:29 2011] fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep 25 11:26:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 11:26:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:26:29 2011] fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 11:26:29 2011] fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 11:26:29 2011] Fit fullrun_mos1_xmm0108860501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 11:50:27 2011] Spatial fit model total counts = 904.692000, observed total counts = 905.000000
[Sun Sep 25 11:50:27 2011] Offset between fit and detection position for source 2 = 0.219875 pixels
[Sun Sep 25 11:50:27 2011] 909.671000 total counts/ 345.815000 bgd. counts: snr = 30.321194
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.219875 pixels
  Position = (290.7, 274.7) = 8 20 35.61 21 4 4.1
  Extent = 9.4 (8.5-10.6)", rotation angle = 0
  Source counts = 563.9 +/- 30.2
  Background counts = 345.8
  Rate = 0.03 +/- 0.001
[Sun Sep 25 11:50:27 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:50:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:50:27 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:50:27 2011] Source does appear to be extended
[Sun Sep 25 11:50:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 12:24:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 12:24:45 2011] Initial guess for spatial extent in simple fitting = 9.44"
[Sun Sep 25 12:24:45 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.876
[Sun Sep 25 12:24:45 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.44"
[Sun Sep 25 12:42:04 2011] fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Sep 25 12:42:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_src1.csv
[Sun Sep 25 12:42:04 2011] fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Sep 25 12:42:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_src1.csv
[Sun Sep 25 12:42:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 12:42:05 2011] fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 12:42:05 2011] fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 12:42:05 2011] Fit fullrun_mos1_xmm0108860501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 12:59:29 2011] Spatial fit model total counts = 986.673000, observed total counts = 987.000000
[Sun Sep 25 12:59:29 2011] Offset between fit and detection position for source 2 = 0.028745 pixels
[Sun Sep 25 12:59:29 2011] 994.012000 total counts/ 424.832000 bgd. counts: snr = 27.614744
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.028745 pixels
  Position = (290.7, 274.7) = 8 20 35.61 21 4 4.0
  Extent = 9.5 (8.7-10.5)", rotation angle = 0
  Source counts = 569.2 +/- 31.5
  Background counts = 424.8
  Rate = 0.03 +/- 0.001
[Sun Sep 25 12:59:29 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 12:59:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 12:59:29 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 12:59:29 2011] Source does appear to be extended
[Sun Sep 25 12:59:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:27:27 2011] XMMSAS src. selection expression = ellipse(25240.929000, 23849.289800, 571.142416, 571.142416, 0.000000, X, Y)
[Sun Sep 25 14:27:27 2011] Writing source region out to fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2_src.reg
[Sun Sep 25 14:27:27 2011] Extracting stamp from image fullrun_mos1_xmm0108860501_pi300-10000_cl_sm2.00.img.gz, (258, 242) - (324, 308)
[Sun Sep 25 14:27:27 2011] XMMSAS bgd. selection expression = annulus(25240.929000, 23849.289800, 951.904027, 1903.808055, X, Y)
[Sun Sep 25 14:27:27 2011] Writing fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2.gif
[Sun Sep 25 14:27:29 2011] Mean detx,y = (405.87, -172.15) 
[Sun Sep 25 14:27:30 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 14:27:35 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 14:27:35 2011] Setting source spectrum file to fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Sep 25 14:27:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Sep 25 14:48:58 2011] Updating aperture counts using extracted products
[Sun Sep 25 14:48:58 2011] Error reading totcts from fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Sep 25 14:48:58 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 14:48:58 2011] Using photon index=1.80, rate=0.0268, arf fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2.arf
[Sun Sep 25 14:48:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 14:48:58 2011] Updating source flux to 2.7e-13
[Sun Sep 25 14:49:23 2011] Reading fit data from xmm0108860501/analysis//spectral/fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2_pl.csv
[Sun Sep 25 14:49:23 2011] Spectral fit parameter nH value = 1.34895e+22
[Sun Sep 25 14:49:23 2011] Spectral fit parameter PhoIndex value = 9.876
[Sun Sep 25 14:49:23 2011] Failed to get F(0.3-8.0) from xmm0108860501/analysis//spectral/fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 14:49:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 14:49:23 2011] Using Nh = 1.3e+22, photon index=9.88, rate=0.0268, arf fullrun_mos1_xmm0108860501_pi300-10000_pass1_cl_src2.arf
[Sun Sep 25 14:49:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 14:49:23 2011] Updating source flux to 1.5e-13