[Mon Jun 11 11:48:48 2012] Detection parameters:
  Position = (295.0, 276.0) = 12 23 6.75 10 37 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10096.7 +/- 121.1
  Background counts = 67.1
  Rate = 0.6 +/- 0.007

[Mon Jun 11 11:48:49 2012] Off-axis axis estimate = 1.64'
[Mon Jun 11 11:50:24 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:50:24 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Jun 11 11:50:24 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Jun 11 11:50:24 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.25"
[Mon Jun 11 12:53:33 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 11 12:53:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src5.csv
[Mon Jun 11 12:53:33 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 11 12:53:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src5.csv
[Mon Jun 11 12:53:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 11 12:53:34 2012] Fit fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jun 11 14:32:31 2012] Source 6 is offset by -2.979081 and 6.152659 pixels which is larger than
2 X fitted extent = 2.776869 x 2.776869, not incorporating fit results
[Mon Jun 11 14:32:31 2012] Spatial fit model total counts = 24275.800000, observed total counts = 24247.000000
[Mon Jun 11 14:32:31 2012] Offset between fit and detection position for source 6 = 0.397220 pixels
[Mon Jun 11 14:32:31 2012] 24252.400000 total counts/ 11742.300000 bgd. counts: snr = 115.447410
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.397220 pixels
  Position = (294.6, 276.2) = 12 23 6.86 10 37 14.2
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 12510.1 +/- 155.7
  Background counts = 11742.3
  Rate = 0.7 +/- 0.009
[Mon Jun 11 14:32:31 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:31 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 14:32:31 2012] Source does appear to be extended
[Mon Jun 11 14:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 14:32:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 14:32:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 14:32:50 2012] Initial guess for spatial extent in simple fitting = 14.50"
[Mon Jun 11 14:32:50 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.953
[Mon Jun 11 14:32:50 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.50"
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 11 15:10:27 2012] Fit fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src4 appears to have run properly
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 11 15:10:27 2012] Fit fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Jun 11 16:45:19 2012] Warning, spatial fit 4 centroid is now closest to src. 32
[Mon Jun 11 16:45:19 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:19 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 16:45:19 2012] Source does appear to be extended
[Mon Jun 11 16:45:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:45:31 2012] Counts = 12510.100000, rescaling region sizes by 3.000000
[Mon Jun 11 16:45:31 2012] XMMSAS src. selection expression = ellipse(25579.272000, 23977.015400, 2610.126075, 2610.126075, 0.000000, X, Y)
[Mon Jun 11 16:45:31 2012] Writing source region out to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun 11 16:45:31 2012] Extracting stamp from image fullrun_pn_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (145, 126) - (445, 426)
[Mon Jun 11 16:45:31 2012] XMMSAS bgd. selection expression = annulus(25579.272000, 23977.015400, 13050.630376, 26101.260751, X, Y) && !ellipse(26705.782000, 22872.312000, 1297.624037, 531.629615, 359.926000, X, Y) && !ellipse(25394.090851, 22305.468719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26288.501190, 21328.489624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25334.118200, 21074.618400, 446.529613, 446.529613, 0.000000, X, Y) && !ellipse(24799.587311, 35703.051880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41996.612976, 29955.940948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24049.318512, 22604.090485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28719.801788, 37295.772095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31171.493011, 35324.704895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.088000, 34991.410000, 3237.280093, 3237.280093, 0.000000, X, Y) && !ellipse(20700.850000, 33953.302000, 1618.640047, 1618.640047, 0.000000, X, Y) && !ellipse(22354.860229, 30732.752075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.048187, 14524.957138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26249.283752, 26680.821594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24878.566000, 25923.430000, 1107.008032, 1107.008032, 0.000000, X, Y) && !ellipse(26643.765350, 26048.157318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23473.722000, 26080.722000, 1153.552033, 1153.552033, 0.000000, X, Y) && !ellipse(24625.864000, 25039.722000, 1153.552033, 1153.552033, 0.000000, X, Y) && !ellipse(18377.047546, 25550.437561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16935.095825, 25374.594971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22534.780945, 25174.721710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27315.416077, 22130.303162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.075600, 21933.277200, 630.913618, 406.368012, 84.345081, X, Y) && !ellipse(23951.778000, 21811.744000, 1355.920039, 1355.920039, 0.000000, X, Y) && !ellipse(21917.956600, 20514.807000, 717.396821, 717.396821, 0.000000, X, Y) && !ellipse(26789.335297, 19534.315079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18685.146800, 17213.004400, 634.684018, 634.684018, 0.000000, X, Y) && !ellipse(28148.771362, 18770.407394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18192.987640, 10815.954224, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 16:45:31 2012] Writing fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src6.gif
[Mon Jun 11 16:47:05 2012] Mean detx,y = (132.44, -93.19) 
[Mon Jun 11 16:47:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 16:54:39 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 16:54:40 2012] Setting source spectrum file to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 11 16:54:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 12 02:44:31 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:31 2012] Error reading totcts from fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 12 02:44:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:31 2012] Using photon index=1.80, rate=0.685, arf fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src6.arf
[Tue Jun 12 02:44:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:31 2012] Updating source flux to 1.5e-12
[Tue Jun 12 02:45:57 2012] Flag b found in src. 6 procflags, skipping spectral fitting