[Mon Jun 11 11:48:48 2012] Detection parameters:
  Position = (273.2, 297.4) = 12 23 13.16 10 38 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.3 +/- 14.5
  Background counts = 61.2
  Rate = 0.004 +/- 0.0009

[Mon Jun 11 11:48:49 2012] Off-axis axis estimate = 1.83'
[Mon Jun 11 11:50:24 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:50:24 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Mon Jun 11 11:50:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Mon Jun 11 11:50:24 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.34"
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src30.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src30.csv
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src30.csv
[Mon Jun 11 12:53:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jun 11 12:53:34 2012] Fit fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Jun 11 14:32:31 2012] Source 31 is offset by 3.538317 and -7.309983 pixels which is larger than
2 X fitted extent = 6.752552 x 6.752552, not incorporating fit results
[Mon Jun 11 14:32:31 2012] Spatial fit model total counts = 1495.130000, observed total counts = 1494.000000
[Mon Jun 11 14:32:31 2012] Offset between fit and detection position for source 31 = 4.062503 pixels
[Mon Jun 11 14:32:31 2012] Warning, changing simple spatial fit ID from 30 to 31
[Mon Jun 11 14:32:31 2012] 1452.929000 total counts/ 1326.780000 bgd. counts: snr = 3.463254
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 4.062503 pixels
  Position = (270.4, 300.3) = 12 23 14.00 10 38 59.4
  Extent = 14.4 (14.4-28.8)", rotation angle = 0
  Source counts = 126.1 +/- 38.1
  Background counts = 1326.8
  Rate = 0.007 +/- 0.002
[Mon Jun 11 14:32:31 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:31 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 14:32:31 2012] Source does appear to be extended
[Mon Jun 11 14:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 14:32:31 2012] Source is confused with source 32
[Mon Jun 11 14:32:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 14:32:50 2012] Initial guess for spatial extent in simple fitting = 14.42"
[Mon Jun 11 14:32:50 2012] source mask rpix=3.3, npix_max = 58, mask sum = 49, frac = 0.842
[Mon Jun 11 14:32:50 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 14.42"
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jun 11 15:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src19.csv
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jun 11 15:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src19.csv
[Mon Jun 11 15:10:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jun 11 15:10:27 2012] Fit fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Jun 11 16:45:19 2012] Warning, spatial fit 19 centroid is now closest to src. 32
[Mon Jun 11 16:45:19 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:19 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 16:45:19 2012] Source does appear to be extended
[Mon Jun 11 16:45:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:45:31 2012] XMMSAS src. selection expression = ellipse(23473.722000, 26080.722000, 865.164025, 865.164025, 0.000000, X, Y)
[Mon Jun 11 16:45:31 2012] Writing source region out to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src31_src.reg
[Mon Jun 11 16:45:31 2012] Extracting stamp from image fullrun_pn_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (221, 251) - (320, 350)
[Mon Jun 11 16:45:31 2012] XMMSAS bgd. selection expression = annulus(23473.722000, 26080.722000, 1441.940041, 2883.880083, X, Y) && !ellipse(26705.782000, 22872.312000, 1297.624037, 531.629615, 359.926000, X, Y) && !ellipse(25579.272000, 23977.015400, 3480.168100, 3480.168100, 0.000000, X, Y) && !ellipse(24049.318512, 22604.090485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26249.283752, 26680.821594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24878.566000, 25923.430000, 1107.008032, 1107.008032, 0.000000, X, Y) && !ellipse(26643.765350, 26048.157318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24625.864000, 25039.722000, 1153.552033, 1153.552033, 0.000000, X, Y) && !ellipse(22534.780945, 25174.721710, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 16:45:31 2012] Writing fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src31.gif
[Mon Jun 11 17:00:36 2012] Mean detx,y = (1013.16, 2590.01) 
[Mon Jun 11 17:00:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 17:00:51 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 17:00:51 2012] Setting source spectrum file to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Jun 11 17:00:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Jun 12 02:44:31 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:31 2012] Error reading totcts from fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Jun 12 02:44:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:32 2012] Using photon index=1.80, rate=0.00691, arf fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src31.arf
[Tue Jun 12 02:44:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:32 2012] Updating source flux to 1.6e-14
[Tue Jun 12 02:45:57 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Tue Jun 12 02:45:57 2012] Flag c found in src. 31 procflags, skipping spectral fitting