[Mon Jun 11 11:48:48 2012] Detection parameters:
  Position = (292.4, 256.9) = 12 23 7.49 10 35 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.4 +/- 25.5
  Background counts = 58.8
  Rate = 0.03 +/- 0.002

[Mon Jun 11 11:48:49 2012] Off-axis axis estimate = 3.04'
[Mon Jun 11 11:50:24 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:50:24 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Mon Jun 11 11:50:24 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Mon Jun 11 11:50:24 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.95"
[Mon Jun 11 12:53:33 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 11 12:53:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 11 12:53:33 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 11 12:53:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 11 12:53:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 11 12:53:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:31 2012] Source 3 is offset by -0.630052 and -7.711946 pixels which is larger than
2 X fitted extent = 6.826943 x 6.826943, not incorporating fit results
[Mon Jun 11 14:32:31 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:31 2012] Assessing source extent using major
[Mon Jun 11 14:32:31 2012] Source does appear to be extended
[Mon Jun 11 14:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 14:32:50 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 14:32:50 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Mon Jun 11 14:32:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Mon Jun 11 14:32:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.95"
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 11 15:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src2.csv
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 11 15:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src2.csv
[Mon Jun 11 15:10:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 11 15:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 11 15:10:27 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 11 15:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 11 15:10:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:45:19 2012] Warning, spatial fit 2 centroid is now closest to src. 4
[Mon Jun 11 16:45:19 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:19 2012] Assessing source extent using major
[Mon Jun 11 16:45:19 2012] Source does appear to be extended
[Mon Jun 11 16:45:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:45:31 2012] XMMSAS src. selection expression = ellipse(25394.090851, 22305.468719, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 11 16:45:31 2012] Writing source region out to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 11 16:45:31 2012] Extracting stamp from image fullrun_pn_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (255, 219) - (330, 294)
[Mon Jun 11 16:45:31 2012] XMMSAS bgd. selection expression = annulus(25394.090851, 22305.468719, 1087.500000, 2175.000000, X, Y) && !ellipse(26705.782000, 22872.312000, 1297.624037, 531.629615, 359.926000, X, Y) && !ellipse(26288.501190, 21328.489624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25334.118200, 21074.618400, 446.529613, 446.529613, 0.000000, X, Y) && !ellipse(25579.272000, 23977.015400, 3480.168100, 3480.168100, 0.000000, X, Y) && !ellipse(24049.318512, 22604.090485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24625.864000, 25039.722000, 1153.552033, 1153.552033, 0.000000, X, Y) && !ellipse(22534.780945, 25174.721710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27315.416077, 22130.303162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23951.778000, 21811.744000, 1355.920039, 1355.920039, 0.000000, X, Y) && !ellipse(26789.335297, 19534.315079, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 16:45:31 2012] Writing fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src3.gif
[Mon Jun 11 16:46:02 2012] Mean detx,y = (1014.46, -1555.62) 
[Mon Jun 11 16:46:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 16:46:15 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 16:46:15 2012] Setting source spectrum file to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 11 16:46:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 11 17:05:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 11 17:05:13 2012] rmf not generated due to insufficient counts
[Tue Jun 12 02:44:31 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:31 2012] Error reading totcts from fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 02:44:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:31 2012] Using photon index=1.80, rate=0.029, arf fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 12 02:44:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:31 2012] Updating source flux to 7.9e-14
[Tue Jun 12 02:45:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 12 02:47:12 2012] xmm0108860101/analysis//spectral/fullrun_pn_xmm0108860101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete