[Mon Jun 11 11:48:48 2012] Detection parameters:
  Position = (282.4, 238.0) = 12 23 10.45 10 34 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.1 +/- 19.1
  Background counts = 46.4
  Rate = 0.01 +/- 0.001

[Mon Jun 11 11:48:49 2012] Off-axis axis estimate = 4.54'
[Mon Jun 11 11:50:24 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:50:24 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Mon Jun 11 11:50:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Mon Jun 11 11:50:24 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.70"
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src12.csv
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src12.csv
[Mon Jun 11 12:53:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jun 11 12:53:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:31 2012] Spatial fit model total counts = 1439.720000, observed total counts = 1433.000000
[Mon Jun 11 14:32:31 2012] Offset between fit and detection position for source 13 = 0.833459 pixels
[Mon Jun 11 14:32:31 2012] Warning, changing simple spatial fit ID from 12 to 4
[Mon Jun 11 14:32:31 2012] 1479.287600 total counts/ 1434.910000 bgd. counts: snr = 1.171525
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.833459 pixels
  Position = (283.2, 238.1) = 12 23 10.21 10 34 28.5
  Extent = 2.8 (2.2-3.9)", rotation angle = 0
  Source counts = 44.4 +/- 38.5
  Background counts = 1434.9
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability