[Mon Jun 11 11:48:48 2012] Detection parameters:
  Position = (305.6, 264.4) = 12 23 3.60 10 36 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 532.2 +/- 30.4
  Background counts = 58.8
  Rate = 0.04 +/- 0.002

[Mon Jun 11 11:48:49 2012] Off-axis axis estimate = 2.52'
[Mon Jun 11 11:50:24 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:50:24 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Mon Jun 11 11:50:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.118
[Mon Jun 11 11:50:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.69"
[Mon Jun 11 12:53:33 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 12:53:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 12:53:33 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 12:53:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 12:53:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 11 12:53:34 2012] fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 12:53:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 11 12:53:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:31 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Mon Jun 11 14:32:31 2012] Source 1 is offset by -1.509009 and -5.699805 pixels which is larger than
2 X fitted extent = 0.892000 x 0.892000, not incorporating fit results
[Mon Jun 11 14:32:31 2012] Spatial fit model total counts = 1248.760000, observed total counts = 1246.000000
[Mon Jun 11 14:32:31 2012] Offset between fit and detection position for source 1 = 1.638741 pixels
[Mon Jun 11 14:32:31 2012] Warning, changing simple spatial fit ID from 1 to 36
[Mon Jun 11 14:32:31 2012] 1193.568800 total counts/ 1144.750000 bgd. counts: snr = 1.442885
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.638741 pixels
  Position = (306.9, 263.5) = 12 23 3.21 10 36 18.9
  Extent = 7.8 (2.7-16.2)", rotation angle = 0
  Source counts = 48.8 +/- 34.5
  Background counts = 1144.8
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability