[Mon Jun 11 11:49:21 2012] Detection parameters:
  Position = (282.8, 294.0) = 12 23 10.32 10 38 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.0 +/- 15.0
  Background counts = 24.3
  Rate = 0.005 +/- 0.0007

[Mon Jun 11 11:49:21 2012] Off-axis axis estimate = 1.18'
[Mon Jun 11 13:51:55 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:51:55 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Mon Jun 11 13:51:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.840
[Mon Jun 11 13:51:55 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.02"
[Mon Jun 11 14:32:20 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 11 14:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src5.csv
[Mon Jun 11 14:32:20 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 11 14:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src5.csv
[Mon Jun 11 14:32:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 11 14:32:21 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jun 11 14:32:41 2012] Spatial fit model total counts = 737.802000, observed total counts = 682.000000
[Mon Jun 11 14:32:41 2012] Offset between fit and detection position for source 6 = 6.897151 pixels
[Mon Jun 11 14:32:41 2012] 734.517000 total counts/ 568.212000 bgd. counts: snr = 6.976701
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 6.897151 pixels
  Position = (287.0, 288.5) = 12 23 9.09 10 38 8.1
  Extent = 14.0 (14.0-28.1)", rotation angle = 0
  Source counts = 166.3 +/- 27.1
  Background counts = 568.2
  Rate = 0.008 +/- 0.001
[Mon Jun 11 14:32:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:41 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 14:32:41 2012] Source does appear to be extended
[Mon Jun 11 14:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:01:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 16:01:37 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Mon Jun 11 16:01:37 2012] source mask rpix=3.2, npix_max = 55, mask sum = 47, frac = 0.846
[Mon Jun 11 16:01:37 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.03"
[Mon Jun 11 16:45:14 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun 11 16:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src5.csv
[Mon Jun 11 16:45:14 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun 11 16:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src5.csv
[Mon Jun 11 16:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun 11 16:45:15 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun 11 16:45:24 2012] Warning, spatial fit 5 centroid is now closest to src. 20
[Mon Jun 11 16:45:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:24 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 16:45:24 2012] Source does appear to be extended
[Mon Jun 11 16:45:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 02:09:59 2012] XMMSAS src. selection expression = ellipse(24922.888000, 25055.180000, 841.980024, 841.980024, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing source region out to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 12 02:09:59 2012] Extracting stamp from image fullrun_mos2_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (239, 240) - (335, 337)
[Tue Jun 12 02:09:59 2012] XMMSAS bgd. selection expression = annulus(24922.888000, 25055.180000, 1403.300040, 2806.600081, X, Y) && !ellipse(25592.906000, 23986.042400, 1160.096033, 1160.096033, 0.000000, X, Y) && !ellipse(25960.510000, 23656.076000, 2039.968059, 2039.968059, 0.000000, X, Y) && !ellipse(25432.594086, 22118.217468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.351105, 22566.771393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.052826, 24757.781219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.970306, 24195.448669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.386000, 22534.116000, 2548.256073, 1194.280034, 226.770000, X, Y) && !ellipse(25628.373291, 26121.791901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23880.955139, 23258.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.066000, 21849.076000, 1274.128037, 1274.128037, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src6.gif
[Tue Jun 12 02:13:30 2012] Mean detx,y = (-10.02, -981.94) 
[Tue Jun 12 02:13:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 02:13:37 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 02:13:37 2012] Setting source spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 12 02:13:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 12 02:44:32 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:32 2012] Error reading totcts from fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 12 02:44:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:32 2012] Using photon index=1.80, rate=0.0079, arf fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src6.arf
[Tue Jun 12 02:44:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:32 2012] Updating source flux to 8.1e-14