[Mon Jun 11 11:49:21 2012] Detection parameters:
  Position = (209.3, 124.6) = 12 23 32.00 10 26 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.8 +/- 8.0
  Background counts = 5.6
  Rate = 0.002 +/- 0.0004

[Mon Jun 11 11:49:21 2012] Off-axis axis estimate = 14.16'
[Mon Jun 11 13:51:55 2012] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:51:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 13:51:55 2012] Initial guess for spatial extent in simple fitting = 13.51"
[Mon Jun 11 13:51:55 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.942
[Mon Jun 11 13:51:55 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.51"
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Jun 11 14:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src29.csv
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Jun 11 14:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src29.csv
[Mon Jun 11 14:32:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jun 11 14:32:21 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Jun 11 14:32:41 2012] Spatial fit model total counts = 104.890000, observed total counts = 101.000000
[Mon Jun 11 14:32:41 2012] Offset between fit and detection position for source 30 = 0.304313 pixels
[Mon Jun 11 14:32:41 2012] 104.723200 total counts/ 82.428100 bgd. counts: snr = 2.455680
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.304313 pixels
  Position = (209.6, 124.6) = 12 23 31.91 10 26 15.1
  Extent = 5.9 (3.4-9.0)", rotation angle = 0
  Source counts = 22.3 +/- 10.2
  Background counts = 82.4
  Rate = 0.001 +/- 0.0005
[Mon Jun 11 14:32:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:41 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 14:32:41 2012] Source does appear to be extended
[Mon Jun 11 14:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 14:32:41 2012] Deleting source due to low Poisson probability 0.8