[Mon Jun 11 11:49:21 2012] Detection parameters:
  Position = (291.8, 242.9) = 12 23 7.68 10 34 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.7 +/- 16.8
  Background counts = 17.3
  Rate = 0.009 +/- 0.0009

[Mon Jun 11 11:49:21 2012] Off-axis axis estimate = 4.05'
[Mon Jun 11 13:51:55 2012] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:51:55 2012] Initial guess for spatial extent in simple fitting = 8.45"
[Mon Jun 11 13:51:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.047
[Mon Jun 11 13:51:55 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.45"
[Mon Jun 11 14:32:20 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun 11 14:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src4.csv
[Mon Jun 11 14:32:20 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun 11 14:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src4.csv
[Mon Jun 11 14:32:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 11 14:32:21 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Jun 11 14:32:41 2012] Source 3 is offset by -6.988105 and 6.716209 pixels which is larger than
2 X fitted extent = 0.971798 x 0.971798, not incorporating fit results
[Mon Jun 11 14:32:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:41 2012] Assessing source extent using major
[Mon Jun 11 14:32:41 2012] Source does appear to be extended
[Mon Jun 11 14:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:01:37 2012] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 16:01:37 2012] Initial guess for spatial extent in simple fitting = 8.45"
[Mon Jun 11 16:01:37 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.047
[Mon Jun 11 16:01:37 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.45"
[Mon Jun 11 16:45:14 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 11 16:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src4.csv
[Mon Jun 11 16:45:14 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 11 16:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src4.csv
[Mon Jun 11 16:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 11 16:45:15 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Jun 11 16:45:24 2012] Source 3 is offset by -6.988105 and 6.716209 pixels which is larger than
2 X fitted extent = 0.971798 x 0.971798, not incorporating fit results
[Mon Jun 11 16:45:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:24 2012] Assessing source extent using major
[Mon Jun 11 16:45:24 2012] Source does appear to be extended
[Mon Jun 11 16:45:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:45:24 2012] Source is confused with source 24
[Tue Jun 12 02:09:59 2012] XMMSAS src. selection expression = ellipse(25336.906830, 21087.438187, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing source region out to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 12 02:09:59 2012] Extracting stamp from image fullrun_mos2_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (254, 205) - (329, 280)
[Tue Jun 12 02:09:59 2012] XMMSAS bgd. selection expression = annulus(25336.906830, 21087.438187, 1087.500000, 2175.000000, X, Y) && !ellipse(25592.906000, 23986.042400, 1160.096033, 1160.096033, 0.000000, X, Y) && !ellipse(25960.510000, 23656.076000, 2039.968059, 2039.968059, 0.000000, X, Y) && !ellipse(25432.594086, 22118.217468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.351105, 22566.771393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.386000, 22534.116000, 2548.256073, 1194.280034, 226.770000, X, Y) && !ellipse(23880.955139, 23258.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.066000, 21849.076000, 1274.128037, 1274.128037, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 12 02:13:23 2012] Mean detx,y = (-1362.64, 2432.83) 
[Tue Jun 12 02:13:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 02:13:29 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 02:13:29 2012] Setting source spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 02:13:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 12 02:36:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 12 02:36:40 2012] rmf not generated due to insufficient counts
[Tue Jun 12 02:44:32 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:32 2012] Error reading totcts from fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 02:44:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:32 2012] Using photon index=1.80, rate=0.00873, arf fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 12 02:44:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:32 2012] Updating source flux to 1e-13
[Tue Jun 12 02:45:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting