[Mon Jun 11 11:49:21 2012] Detection parameters:
  Position = (277.1, 259.9) = 12 23 12.01 10 36 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.0 +/- 13.1
  Background counts = 21.9
  Rate = 0.004 +/- 0.0007

[Mon Jun 11 11:49:21 2012] Off-axis axis estimate = 3.19'
[Mon Jun 11 13:51:55 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:51:55 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Mon Jun 11 13:51:55 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.728
[Mon Jun 11 13:51:55 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.02"
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jun 11 14:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src10.csv
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jun 11 14:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src10.csv
[Mon Jun 11 14:32:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jun 11 14:32:21 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jun 11 14:32:41 2012] Source 25 is offset by 7.502633 and 3.741349 pixels which is larger than
2 X fitted extent = 7.377931 x 7.377931, not incorporating fit results
[Mon Jun 11 14:32:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:41 2012] Assessing source extent using major
[Mon Jun 11 14:32:41 2012] Source does appear to be extended
[Mon Jun 11 14:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:01:37 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 16:01:37 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Mon Jun 11 16:01:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.728
[Mon Jun 11 16:01:37 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.02"
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jun 11 16:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src9.csv
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jun 11 16:45:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src9.csv
[Mon Jun 11 16:45:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jun 11 16:45:15 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jun 11 16:45:24 2012] Source 25 is offset by -7.253183 and -5.226720 pixels which is larger than
2 X fitted extent = 3.737747 x 3.737747, not incorporating fit results
[Mon Jun 11 16:45:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:24 2012] Assessing source extent using major
[Mon Jun 11 16:45:24 2012] Source does appear to be extended
[Mon Jun 11 16:45:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 02:09:59 2012] XMMSAS src. selection expression = ellipse(24061.351105, 22566.771393, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing source region out to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src25_src.reg
[Tue Jun 12 02:09:59 2012] Extracting stamp from image fullrun_mos2_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (240, 222) - (315, 297)
[Tue Jun 12 02:09:59 2012] XMMSAS bgd. selection expression = annulus(24061.351105, 22566.771393, 1087.500000, 2175.000000, X, Y) && !ellipse(25592.906000, 23986.042400, 1160.096033, 1160.096033, 0.000000, X, Y) && !ellipse(25960.510000, 23656.076000, 2039.968059, 2039.968059, 0.000000, X, Y) && !ellipse(25336.906830, 21087.438187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.888000, 25055.180000, 1122.640032, 1122.640032, 0.000000, X, Y) && !ellipse(25432.594086, 22118.217468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.052826, 24757.781219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.970306, 24195.448669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.386000, 22534.116000, 2548.256073, 1194.280034, 226.770000, X, Y) && !ellipse(23880.955139, 23258.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.066000, 21849.076000, 1274.128037, 1274.128037, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src25.gif
[Tue Jun 12 02:13:46 2012] Mean detx,y = (-1842.95, 619.89) 
[Tue Jun 12 02:13:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 02:13:52 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 02:13:52 2012] Setting source spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jun 12 02:13:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Jun 12 02:40:18 2012] Not generating rmf since there are only 69 counts
[Tue Jun 12 02:40:18 2012] rmf not generated due to insufficient counts
[Tue Jun 12 02:44:32 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:32 2012] Error reading totcts from fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jun 12 02:44:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:32 2012] Using photon index=1.80, rate=0.00354, arf fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src25.arf
[Tue Jun 12 02:44:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:32 2012] Updating source flux to 3.4e-14
[Tue Jun 12 02:45:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting