[Mon Jun 11 11:49:21 2012] Detection parameters:
  Position = (304.8, 269.0) = 12 23 3.84 10 36 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 499.0 +/- 29.1
  Background counts = 23.2
  Rate = 0.02 +/- 0.001

[Mon Jun 11 11:49:21 2012] Off-axis axis estimate = 2.18'
[Mon Jun 11 13:51:55 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:51:55 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Mon Jun 11 13:51:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Mon Jun 11 13:51:55 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.52"
[Mon Jun 11 14:32:20 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jun 11 14:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src2.csv
[Mon Jun 11 14:32:20 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jun 11 14:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src2.csv
[Mon Jun 11 14:32:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jun 11 14:32:21 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jun 11 14:32:41 2012] Source 2 is offset by 7.715384 and -6.239235 pixels which is larger than
2 X fitted extent = 6.250115 x 6.250115, not incorporating fit results
[Mon Jun 11 14:32:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:41 2012] Assessing source extent using major
[Mon Jun 11 14:32:41 2012] Source does appear to be extended
[Mon Jun 11 14:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:01:37 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 16:01:37 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Mon Jun 11 16:01:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Mon Jun 11 16:01:37 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.52"
[Mon Jun 11 16:45:14 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 11 16:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src2.csv
[Mon Jun 11 16:45:14 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 11 16:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src2.csv
[Mon Jun 11 16:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 11 16:45:15 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jun 11 16:45:24 2012] Source 2 is offset by 7.715384 and -6.181740 pixels which is larger than
2 X fitted extent = 6.192230 x 6.192230, not incorporating fit results
[Mon Jun 11 16:45:24 2012] Spatial fit model total counts = 1846.430000, observed total counts = 1704.000000
[Mon Jun 11 16:45:24 2012] Offset between fit and detection position for source 2 = 6.778735 pixels
[Mon Jun 11 16:45:24 2012] Warning, changing simple spatial fit ID from 2 to 12
[Mon Jun 11 16:45:24 2012] 1725.467000 total counts/ 1169.260000 bgd. counts: snr = 16.266005
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 6.778735 pixels
  Position = (299.0, 272.5) = 12 23 5.57 10 36 58.1
  Extent = 25.5 (20.6-31.6)", rotation angle = 0
  Source counts = 556.2 +/- 41.5
  Background counts = 1169.3
  Rate = 0.03 +/- 0.002
[Mon Jun 11 16:45:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:24 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 16:45:24 2012] Source does appear to be extended
[Mon Jun 11 16:45:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:45:24 2012] Source is confused with source 1
[Tue Jun 12 02:09:59 2012] XMMSAS src. selection expression = ellipse(25960.510000, 23656.076000, 1529.976044, 1529.976044, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing source region out to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 12 02:09:59 2012] Extracting stamp from image fullrun_mos2_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (211, 185) - (387, 360)
[Tue Jun 12 02:09:59 2012] XMMSAS bgd. selection expression = annulus(25960.510000, 23656.076000, 2549.960073, 5099.920147, X, Y) && !ellipse(25592.906000, 23986.042400, 1160.096033, 1160.096033, 0.000000, X, Y) && !ellipse(25336.906830, 21087.438187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.888000, 25055.180000, 1122.640032, 1122.640032, 0.000000, X, Y) && !ellipse(25432.594086, 22118.217468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.351105, 22566.771393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.052826, 24757.781219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.970306, 24195.448669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.386000, 22534.116000, 2548.256073, 1194.280034, 226.770000, X, Y) && !ellipse(25628.373291, 26121.791901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23880.955139, 23258.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.066000, 21849.076000, 1274.128037, 1274.128037, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src2.gif
[Tue Jun 12 02:13:10 2012] Mean detx,y = (128.76, 118.12) 
[Tue Jun 12 02:13:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 02:13:21 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 02:13:21 2012] Setting source spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 12 02:13:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 12 02:44:32 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:32 2012] Error reading totcts from fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 12 02:44:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:32 2012] Using photon index=1.80, rate=0.0264, arf fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src2.arf
[Tue Jun 12 02:44:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:32 2012] Updating source flux to 2.3e-13
[Tue Jun 12 02:45:03 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Tue Jun 12 02:45:03 2012] Flag c found in src. 2 procflags, skipping spectral fitting