[Mon Jun 11 11:49:21 2012] Detection parameters:
  Position = (294.9, 276.0) = 12 23 6.75 10 37 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3509.9 +/- 71.5
  Background counts = 25.7
  Rate = 0.2 +/- 0.003

[Mon Jun 11 11:49:21 2012] Off-axis axis estimate = 1.64'
[Mon Jun 11 13:51:55 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:51:55 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Jun 11 13:51:55 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Jun 11 13:51:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Jun 11 14:32:20 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 14:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 14:32:20 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 14:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 14:32:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 14:32:21 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 14:32:21 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 11 14:32:41 2012] Spatial fit model total counts = 8757.360000, observed total counts = 8407.000000
[Mon Jun 11 14:32:41 2012] Offset between fit and detection position for source 1 = 0.301533 pixels
[Mon Jun 11 14:32:41 2012] 8706.050000 total counts/ 4142.760000 bgd. counts: snr = 70.897869
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.301533 pixels
  Position = (294.7, 276.3) = 12 23 6.81 10 37 14.6
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 4563.3 +/- 93.3
  Background counts = 4142.8
  Rate = 0.2 +/- 0.004
[Mon Jun 11 14:32:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:41 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 14:32:41 2012] Source does appear to be extended
[Mon Jun 11 14:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:01:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 16:01:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 16:01:37 2012] Initial guess for spatial extent in simple fitting = 14.50"
[Mon Jun 11 16:01:37 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.089
[Mon Jun 11 16:01:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.50"
[Mon Jun 11 16:45:14 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 11 16:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 16:45:14 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 11 16:45:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 16:45:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 11 16:45:15 2012] fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 11 16:45:15 2012] Fit fullrun_mos2_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 11 16:45:24 2012] Warning, spatial fit 1 centroid is now closest to src. 24
[Mon Jun 11 16:45:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:24 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 16:45:24 2012] Source does appear to be extended
[Mon Jun 11 16:45:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:45:24 2012] Source is confused with source 2
[Mon Jun 11 16:45:24 2012] Source is confused with source 24
[Tue Jun 12 02:09:59 2012] Counts = 4563.290000, rescaling region sizes by 2.000000
[Tue Jun 12 02:09:59 2012] XMMSAS src. selection expression = ellipse(25592.906000, 23986.042400, 1740.144050, 1740.144050, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing source region out to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 02:09:59 2012] Extracting stamp from image fullrun_mos2_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (195, 176) - (395, 376)
[Tue Jun 12 02:09:59 2012] XMMSAS bgd. selection expression = annulus(25592.906000, 23986.042400, 5800.480167, 11600.960334, X, Y) && !ellipse(25960.510000, 23656.076000, 2039.968059, 2039.968059, 0.000000, X, Y) && !ellipse(25336.906830, 21087.438187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.888000, 25055.180000, 1122.640032, 1122.640032, 0.000000, X, Y) && !ellipse(25432.594086, 22118.217468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.351105, 22566.771393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.052826, 24757.781219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.970306, 24195.448669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.386000, 22534.116000, 2548.256073, 1194.280034, 226.770000, X, Y) && !ellipse(25628.373291, 26121.791901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23880.955139, 23258.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.066000, 21849.076000, 1274.128037, 1274.128037, 0.000000, X, Y)
[Tue Jun 12 02:09:59 2012] Writing fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 02:10:01 2012] Mean detx,y = (82.04, -11.16) 
[Tue Jun 12 02:10:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 02:13:08 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 02:13:08 2012] Setting source spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 02:13:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 02:44:32 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:32 2012] Error reading totcts from fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 02:44:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:32 2012] Using photon index=1.80, rate=0.217, arf fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 02:44:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:32 2012] Updating source flux to 2e-12
[Tue Jun 12 02:45:03 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jun 12 02:45:57 2012] Reading fit data from xmm0108860101/analysis//spectral/fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 02:45:57 2012] Spectral fit parameter nH value = 1.00198e+22
[Tue Jun 12 02:45:57 2012] Spectral fit parameter PhoIndex value = 8.0186
[Tue Jun 12 02:45:57 2012] Failed to get F(0.3-8.0) from xmm0108860101/analysis//spectral/fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 02:45:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:45:57 2012] Using Nh = 1e+22, photon index=8.02, rate=0.217, arf fullrun_mos2_xmm0108860101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 02:45:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:45:57 2012] Updating source flux to 1.1e-12