[Mon Jun 11 11:49:05 2012] Detection parameters:
  Position = (300.7, 297.9) = 12 23 5.04 10 38 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.8 +/- 12.9
  Background counts = 20.0
  Rate = 0.004 +/- 0.0007

[Mon Jun 11 11:49:05 2012] Off-axis axis estimate = 0.17'
[Mon Jun 11 12:53:34 2012] Using EEF radius (= 6.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 12:53:34 2012] Initial guess for spatial extent in simple fitting = 6.51"
[Mon Jun 11 12:53:34 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Mon Jun 11 12:53:34 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 6.51"
[Mon Jun 11 13:51:54 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jun 11 13:51:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src10.csv
[Mon Jun 11 13:51:54 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jun 11 13:51:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src10.csv
[Mon Jun 11 13:51:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 13:51:54 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jun 11 13:51:54 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jun 11 13:51:54 2012] Fit fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jun 11 14:32:37 2012] Source 10 is offset by 5.713286 and 4.938872 pixels which is larger than
2 X fitted extent = 4.162239 x 4.162239, not incorporating fit results
[Mon Jun 11 14:32:37 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:37 2012] Assessing source extent using major
[Mon Jun 11 14:32:37 2012] Source does appear to be extended
[Mon Jun 11 14:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 15:10:27 2012] Using EEF radius (= 6.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 15:10:27 2012] Initial guess for spatial extent in simple fitting = 6.51"
[Mon Jun 11 15:10:27 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Mon Jun 11 15:10:27 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.51"
[Mon Jun 11 16:01:36 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jun 11 16:01:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src9.csv
[Mon Jun 11 16:01:36 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jun 11 16:01:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src9.csv
[Mon Jun 11 16:01:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:01:36 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jun 11 16:01:36 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jun 11 16:01:36 2012] Fit fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jun 11 16:45:22 2012] Source 10 is offset by -6.265288 and -7.039702 pixels which is larger than
2 X fitted extent = 5.989288 x 5.989288, not incorporating fit results
[Mon Jun 11 16:45:22 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:22 2012] Assessing source extent using major
[Mon Jun 11 16:45:22 2012] Source does appear to be extended
[Mon Jun 11 16:45:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 01:10:51 2012] XMMSAS src. selection expression = ellipse(26114.487915, 25873.113892, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 01:10:51 2012] Writing source region out to fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun 12 01:10:51 2012] Extracting stamp from image fullrun_mos1_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (263, 260) - (338, 335)
[Tue Jun 12 01:10:51 2012] XMMSAS bgd. selection expression = annulus(26114.487915, 25873.113892, 1087.500000, 2175.000000, X, Y) && !ellipse(25555.003660, 23948.059000, 1687.024049, 1687.024049, 0.000000, X, Y) && !ellipse(26078.300000, 23033.208000, 1005.440029, 1005.440029, 0.000000, X, Y) && !ellipse(26465.274000, 22342.660000, 2542.832073, 317.853609, 52.858000, X, Y) && !ellipse(24490.570000, 24160.272000, 1224.856035, 1224.856035, 0.000000, X, Y) && !ellipse(23743.400726, 24754.369507, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 01:10:51 2012] Writing fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src10.gif
[Tue Jun 12 01:15:49 2012] Mean detx,y = (-1186.86, -1445.26) 
[Tue Jun 12 01:15:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 01:15:55 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 01:15:55 2012] Setting source spectrum file to fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 12 01:15:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun 12 02:09:24 2012] Not generating rmf since there are only 69 counts
[Tue Jun 12 02:09:24 2012] rmf not generated due to insufficient counts
[Tue Jun 12 02:44:32 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:32 2012] Error reading totcts from fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 12 02:44:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:32 2012] Using photon index=1.80, rate=0.00357, arf fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src10.arf
[Tue Jun 12 02:44:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:32 2012] Updating source flux to 3.6e-14
[Tue Jun 12 02:44:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting