[Mon Jun 11 11:49:05 2012] Detection parameters:
  Position = (294.9, 276.0) = 12 23 6.75 10 37 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3472.3 +/- 71.6
  Background counts = 21.9
  Rate = 0.2 +/- 0.003

[Mon Jun 11 11:49:05 2012] Off-axis axis estimate = 1.65'
[Mon Jun 11 12:53:34 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 12:53:34 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Jun 11 12:53:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Jun 11 12:53:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Jun 11 13:51:54 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 13:51:54 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 13:51:54 2012] Fit fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Jun 11 13:51:54 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 13:51:54 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 13:51:54 2012] Fit fullrun_mos1_xmm0108860101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 11 14:32:37 2012] Spatial fit model total counts = 8553.630000, observed total counts = 8532.000000
[Mon Jun 11 14:32:37 2012] Offset between fit and detection position for source 1 = 0.249190 pixels
[Mon Jun 11 14:32:37 2012] 8497.850000 total counts/ 4078.560000 bgd. counts: snr = 69.198881
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.249190 pixels
  Position = (294.7, 276.1) = 12 23 6.82 10 37 14.1
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 4419.3 +/- 92.2
  Background counts = 4078.6
  Rate = 0.2 +/- 0.004
[Mon Jun 11 14:32:37 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:32:37 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 14:32:37 2012] Source does appear to be extended
[Mon Jun 11 14:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 15:10:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 15:10:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 15:10:27 2012] Initial guess for spatial extent in simple fitting = 14.50"
[Mon Jun 11 15:10:27 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.089
[Mon Jun 11 15:10:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.50"
[Mon Jun 11 16:01:36 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 11 16:01:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 16:01:36 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 11 16:01:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 16:01:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:01:36 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 11 16:01:36 2012] fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 11 16:01:36 2012] Fit fullrun_mos1_xmm0108860101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 11 16:45:22 2012] Spatial fit model total counts = 12934.400000, observed total counts = 12932.000000
[Mon Jun 11 16:45:22 2012] Offset between fit and detection position for source 1 = 0.523856 pixels
[Mon Jun 11 16:45:22 2012] 12942.550000 total counts/ 4105.970000 bgd. counts: snr = 137.903830
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.523856 pixels
  Position = (294.3, 275.8) = 12 23 6.94 10 37 12.7
  Extent = 21.1 (20.6-21.7)", rotation angle = 0
  Source counts = 8836.6 +/- 113.8
  Background counts = 4106.0
  Rate = 0.4 +/- 0.005
[Mon Jun 11 16:45:22 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:45:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:45:22 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 16:45:22 2012] Source does appear to be extended
[Mon Jun 11 16:45:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:45:22 2012] Source is confused with source 4
[Mon Jun 11 16:45:22 2012] Source is confused with source 18
[Mon Jun 11 16:45:22 2012] Source is confused with source 17
[Tue Jun 12 01:10:51 2012] Counts = 8836.580000, rescaling region sizes by 2.000000
[Tue Jun 12 01:10:51 2012] XMMSAS src. selection expression = ellipse(25555.003660, 23948.059000, 2530.536073, 2530.536073, 0.000000, X, Y)
[Tue Jun 12 01:10:51 2012] Writing source region out to fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 01:10:51 2012] Extracting stamp from image fullrun_mos1_xmm0108860101_pi300-10000_cl_sm2.00.img.gz, (149, 130) - (440, 421)
[Tue Jun 12 01:10:51 2012] XMMSAS bgd. selection expression = annulus(25555.003660, 23948.059000, 8435.120243, 16870.240485, X, Y) && !ellipse(26078.300000, 23033.208000, 1005.440029, 1005.440029, 0.000000, X, Y) && !ellipse(25339.240180, 21060.848800, 530.390415, 530.390415, 0.000000, X, Y) && !ellipse(25088.993469, 22247.464294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26465.274000, 22342.660000, 2542.832073, 317.853609, 52.858000, X, Y) && !ellipse(24435.572000, 20638.438000, 371.416011, 371.416011, 0.000000, X, Y) && !ellipse(24490.570000, 24160.272000, 1224.856035, 1224.856035, 0.000000, X, Y) && !ellipse(25977.974000, 22119.252000, 1318.632038, 1318.632038, 0.000000, X, Y) && !ellipse(26114.487915, 25873.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23743.400726, 24754.369507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18358.162400, 25623.968400, 525.254415, 525.254415, 0.000000, X, Y) && !ellipse(24748.839081, 35717.816498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18731.346000, 17261.364000, 1051.416030, 1051.416030, 0.000000, X, Y) && !ellipse(24239.785004, 21758.089294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25419.812775, 21808.801682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38187.402618, 20917.987579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27103.262000, 21807.314000, 1271.416037, 1271.416037, 0.000000, X, Y)
[Tue Jun 12 01:10:51 2012] Writing fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 01:10:54 2012] Mean detx,y = (225.98, -181.98) 
[Tue Jun 12 01:10:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 01:14:32 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 01:14:32 2012] Setting source spectrum file to fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 01:14:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 02:44:32 2012] Updating aperture counts using extracted products
[Tue Jun 12 02:44:32 2012] Error reading totcts from fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 02:44:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:44:32 2012] Using photon index=1.80, rate=0.42, arf fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 02:44:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:44:32 2012] Updating source flux to 3.5e-12
[Tue Jun 12 02:44:33 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jun 12 02:45:03 2012] Reading fit data from xmm0108860101/analysis//spectral/fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 02:45:03 2012] Spectral fit parameter nH value = 8.71614e+21
[Tue Jun 12 02:45:03 2012] Spectral fit parameter PhoIndex value = 7.18811
[Tue Jun 12 02:45:03 2012] Failed to get F(0.3-8.0) from xmm0108860101/analysis//spectral/fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 02:45:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 02:45:03 2012] Using Nh = 8.7e+21, photon index=7.19, rate=0.42, arf fullrun_mos1_xmm0108860101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 02:45:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 02:45:03 2012] Updating source flux to 2e-12