[Fri Jun  8 10:49:02 2012] Detection parameters:
  Position = (285.5, 270.8) = 10 23 41.99 4 11 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2367.9 +/- 64.7
  Background counts = 51.0
  Rate = 0.05 +/- 0.001

[Fri Jun  8 10:49:05 2012] Off-axis axis estimate = 2.21'
[Sat Jun  9 03:24:14 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 03:24:14 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Sat Jun  9 03:24:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.853
[Sat Jun  9 03:24:14 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.54"
[Sat Jun  9 05:11:18 2012] fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun  9 05:11:18 2012] fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun  9 05:11:18 2012] Fit fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Jun  9 05:11:19 2012] fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun  9 05:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun  9 05:11:19 2012] fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun  9 05:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun  9 05:11:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 05:12:01 2012] Source 1 is offset by -6.469164 and -1.920092 pixels which is larger than
2 X fitted extent = 3.279609 x 3.533260, not incorporating fit results
[Sat Jun  9 05:12:02 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 05:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 05:12:02 2012] Assessing source extent using major
[Sat Jun  9 05:12:02 2012] Source does appear to be extended
[Sat Jun  9 05:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 05:12:02 2012] Source is confused with source 3
[Sat Jun  9 11:58:18 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 11:58:18 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Sat Jun  9 11:58:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.853
[Sat Jun  9 11:58:18 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.54"
[Sat Jun  9 13:31:34 2012] fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun  9 13:31:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_src2.csv
[Sat Jun  9 13:31:34 2012] fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun  9 13:31:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_src2.csv
[Sat Jun  9 13:31:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 13:31:35 2012] fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun  9 13:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  9 13:31:35 2012] fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun  9 13:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  9 13:31:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 13:32:26 2012] Source 1 is offset by 7.388353 and 2.985370 pixels which is larger than
2 X fitted extent = 4.069499 x 6.928782, not incorporating fit results
[Sat Jun  9 13:32:26 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 13:32:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 13:32:26 2012] Assessing source extent using major
[Sat Jun  9 13:32:26 2012] Source does appear to be extended
[Sat Jun  9 13:32:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 05:26:56 2012] Counts = 2367.924805, rescaling region sizes by 2.000000
[Sun Jun 10 05:26:56 2012] XMMSAS src. selection expression = ellipse(24786.484741, 23511.959167, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 10 05:26:56 2012] Writing source region out to fullrun_mos2_xmm0108670101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 10 05:26:56 2012] Extracting stamp from image fullrun_mos2_xmm0108670101_pi300-10000_cl_sm2.00.img.gz, (210, 196) - (360, 346)
[Sun Jun 10 05:26:56 2012] XMMSAS bgd. selection expression = annulus(24786.484741, 23511.959167, 4350.000000, 8700.000000, X, Y) && !ellipse(25374.813000, 23685.394800, 2695.176078, 2695.176078, 0.000000, X, Y) && !ellipse(22766.206573, 17370.523285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26878.154200, 21409.010600, 301.445609, 301.445609, 0.000000, X, Y) && !ellipse(28822.730600, 28799.894800, 469.979214, 469.979214, 0.000000, X, Y) && !ellipse(21896.460129, 23413.927521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19902.037964, 24161.397919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22027.398209, 29126.881500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27971.425500, 19689.552440, 533.736815, 335.305610, 335.492166, X, Y) && !ellipse(27694.968445, 24483.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27714.757280, 20687.700200, 454.580013, 454.580013, 0.000000, X, Y) && !ellipse(24389.372009, 25952.969208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25608.532257, 21276.247940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25490.797638, 30434.857788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.310394, 26362.414551, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 10 05:26:56 2012] Writing fullrun_mos2_xmm0108670101_pi300-10000_pass1_cl_src1.gif
[Sun Jun 10 05:38:49 2012] Mean detx,y = (-257.57, 166.03) 
[Sun Jun 10 05:38:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 05:43:08 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 05:43:08 2012] Setting source spectrum file to fullrun_mos2_xmm0108670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 05:43:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 10 06:30:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 10 06:30:12 2012] rmf not generated due to insufficient counts
[Sun Jun 10 06:57:59 2012] Updating aperture counts using extracted products
[Sun Jun 10 06:57:59 2012] Error reading totcts from fullrun_mos2_xmm0108670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 06:58:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 06:58:00 2012] Using photon index=1.80, rate=0.052, arf fullrun_mos2_xmm0108670101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 10 06:58:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 06:58:00 2012] Updating source flux to 4.9e-13
[Sun Jun 10 06:59:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting