[Fri Jun  8 10:48:18 2012] Detection parameters:
  Position = (331.6, 331.8) = 10 23 28.58 4 15 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.2 +/- 17.2
  Background counts = 15.2
  Rate = 0.005 +/- 0.0004

[Fri Jun  8 10:48:19 2012] Off-axis axis estimate = 3.41'
[Sat Jun  9 01:47:56 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 01:47:56 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Sat Jun  9 01:47:56 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.113
[Sat Jun  9 01:47:56 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.13"
[Sat Jun  9 03:24:12 2012] fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun  9 03:24:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_src9.csv
[Sat Jun  9 03:24:12 2012] fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun  9 03:24:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_src9.csv
[Sat Jun  9 03:24:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 03:24:13 2012] fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun  9 03:24:13 2012] fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun  9 03:24:13 2012] Fit fullrun_mos1_xmm0108670101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Jun  9 05:11:51 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.103205 pixels away
[Sat Jun  9 05:11:51 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 05:11:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 05:11:51 2012] Assessing source extent using major
[Sat Jun  9 05:11:51 2012] Source does appear to be extended
[Sat Jun  9 05:11:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 10:18:20 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 10:18:20 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Sat Jun  9 10:18:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.113
[Sat Jun  9 10:18:20 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.13"
[Sat Jun  9 11:58:17 2012] fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_src8.ximg exists
[Sat Jun  9 11:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_src8.csv
[Sat Jun  9 11:58:17 2012] fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Jun  9 11:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_src8.csv
[Sat Jun  9 11:58:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 11:58:17 2012] fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Jun  9 11:58:17 2012] fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Jun  9 11:58:17 2012] Fit fullrun_mos1_xmm0108670101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Jun  9 13:32:15 2012] Spatial fit model total counts = 304.969000, observed total counts = 305.000000
[Sat Jun  9 13:32:15 2012] Offset between fit and detection position for source 26 = 0.163196 pixels
[Sat Jun  9 13:32:15 2012] 307.299000 total counts/ 173.571000 bgd. counts: snr = 10.150414
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.163196 pixels
  Position = (331.6, 331.6) = 10 23 28.57 4 15 24.3
  Extent = 5.8 (4.8-7.0)", rotation angle = 0
  Source counts = 133.7 +/- 17.5
  Background counts = 173.6
  Rate = 0.002 +/- 0.0003
[Sat Jun  9 13:32:15 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 13:32:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 13:32:15 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 13:32:15 2012] Source does appear to be extended
[Sat Jun  9 13:32:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 03:25:37 2012] XMMSAS src. selection expression = ellipse(28802.122600, 28802.327800, 350.515810, 350.515810, 0.000000, X, Y)
[Sun Jun 10 03:25:37 2012] Writing source region out to fullrun_mos1_xmm0108670101_pi300-10000_pass1_cl_src26_src.reg
[Sun Jun 10 03:25:37 2012] Extracting stamp from image fullrun_mos1_xmm0108670101_pi300-10000_cl_sm2.00.img.gz, (311, 311) - (352, 352)
[Sun Jun 10 03:25:37 2012] XMMSAS bgd. selection expression = annulus(28802.122600, 28802.327800, 584.193017, 1168.386034, X, Y)
[Sun Jun 10 03:25:37 2012] Writing fullrun_mos1_xmm0108670101_pi300-10000_pass1_cl_src26.gif
[Sun Jun 10 03:42:15 2012] Mean detx,y = (-2910.29, -5185.80) 
[Sun Jun 10 03:42:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 03:42:25 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 03:42:25 2012] Setting source spectrum file to fullrun_mos1_xmm0108670101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 10 03:42:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108670101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Jun 10 06:57:59 2012] Updating aperture counts using extracted products
[Sun Jun 10 06:57:59 2012] Error reading totcts from fullrun_mos1_xmm0108670101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 10 06:57:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 06:57:59 2012] Using photon index=1.80, rate=0.0025, arf fullrun_mos1_xmm0108670101_pi300-10000_pass1_cl_src26.arf
[Sun Jun 10 06:57:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 06:57:59 2012] Updating source flux to 4e-14