[Tue Jun  5 10:58:42 2012] Detection parameters:
  Position = (157.4, 343.1) = 23 54 45.02 -10 19 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.7 +/- 13.2
  Background counts = 38.7
  Rate = 0.003 +/- 0.0005

[Tue Jun  5 10:58:43 2012] Off-axis axis estimate = 10.73'
[Tue Jun  5 11:04:07 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 11:04:07 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Tue Jun  5 11:04:07 2012] source mask rpix=2.7, npix_max = 41, mask sum = 37, frac = 0.897
[Tue Jun  5 11:04:07 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 11.79"
[Tue Jun  5 13:57:34 2012] fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jun  5 13:57:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_src33.csv
[Tue Jun  5 13:57:34 2012] fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jun  5 13:57:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_src33.csv
[Tue Jun  5 13:57:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 13:57:35 2012] fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jun  5 13:57:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jun  5 13:57:35 2012] fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jun  5 13:57:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jun  5 13:57:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:13:53 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 15.723531 pixels away
[Tue Jun  5 17:13:53 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:13:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:13:53 2012] Assessing source extent using major
[Tue Jun  5 17:13:53 2012] Source does appear to be extended
[Tue Jun  5 17:13:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 17:14:24 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 17:14:24 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Tue Jun  5 17:14:24 2012] source mask rpix=2.7, npix_max = 41, mask sum = 37, frac = 0.897
[Tue Jun  5 17:14:24 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 11.79"
[Tue Jun  5 19:25:49 2012] fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_src33.ximg exists
[Tue Jun  5 19:25:49 2012] fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Jun  5 19:25:49 2012] Fit fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_src33 appears to have run properly
[Tue Jun  5 19:25:50 2012] fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Jun  5 19:25:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Tue Jun  5 19:25:50 2012] fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Jun  5 19:25:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Tue Jun  5 19:25:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 22:06:05 2012] Spatial fit model total counts = 349.119000, observed total counts = 339.000000
[Tue Jun  5 22:06:05 2012] Offset between fit and detection position for source 33 = 0.746164 pixels
[Tue Jun  5 22:06:05 2012] 351.370000 total counts/ 321.087000 bgd. counts: snr = 1.690003
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.746164 pixels
  Position = (158.1, 343.0) = 23 54 44.80 -10 19 47.0
  Extent = 5.7" x 5.7", rotation angle = 0
  Source counts = 30.3 +/- 18.7
  Background counts = 321.1
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability