[Tue Jun  5 11:00:13 2012] Detection parameters:
  Position = (193.6, 393.9) = 23 54 34.34 -10 16 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.9 +/- 22.1
  Background counts = 43.0
  Rate = 0.02 +/- 0.001

[Tue Jun  5 11:00:14 2012] Off-axis axis estimate = 10.28'
[Tue Jun  5 15:58:10 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 15:58:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  5 15:58:10 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Tue Jun  5 15:58:10 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.052
[Tue Jun  5 15:58:10 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.57"
[Tue Jun  5 17:13:33 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jun  5 17:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src4.csv
[Tue Jun  5 17:13:33 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jun  5 17:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src4.csv
[Tue Jun  5 17:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:13:34 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jun  5 17:13:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun  5 17:13:34 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jun  5 17:13:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun  5 17:13:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:14:08 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.113009 pixels away
[Tue Jun  5 17:14:08 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:14:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:14:08 2012] Assessing source extent using major
[Tue Jun  5 17:14:08 2012] Source does appear to be extended
[Tue Jun  5 17:14:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 20:56:23 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 20:56:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  5 20:56:23 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Tue Jun  5 20:56:23 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.052
[Tue Jun  5 20:56:23 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.57"
[Tue Jun  5 22:05:54 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jun  5 22:05:54 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jun  5 22:05:54 2012] Fit fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue Jun  5 22:05:54 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jun  5 22:05:54 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jun  5 22:05:54 2012] Fit fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Jun  5 22:06:15 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.391028 pixels away
[Tue Jun  5 22:06:15 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 22:06:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 22:06:15 2012] Assessing source extent using major
[Tue Jun  5 22:06:15 2012] Source does appear to be extended
[Tue Jun  5 22:06:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 01:04:24 2012] XMMSAS src. selection expression = ellipse(16794.793457, 34218.967499, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  6 01:04:24 2012] Writing source region out to fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src7_src.reg
[Wed Jun  6 01:04:24 2012] Extracting stamp from image fullrun_mos2_xmm0108460301_pi300-10000_cl_sm2.00.img.gz, (156, 356) - (231, 431)
[Wed Jun  6 01:04:24 2012] XMMSAS bgd. selection expression = annulus(16794.793457, 34218.967499, 1087.500000, 2175.000000, X, Y)
[Wed Jun  6 01:04:24 2012] Writing fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src7.gif
[Wed Jun  6 01:05:04 2012] Mean detx,y = (-10276.92, -5902.61) 
[Wed Jun  6 01:05:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 01:05:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 01:05:26 2012] Setting source spectrum file to fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jun  6 01:05:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jun  6 01:21:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  6 01:21:30 2012] rmf not generated due to insufficient counts
[Wed Jun  6 01:28:27 2012] Updating aperture counts using extracted products
[Wed Jun  6 01:28:27 2012] Error reading totcts from fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jun  6 01:28:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 01:28:28 2012] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src7.arf
[Wed Jun  6 01:28:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 01:28:28 2012] Updating source flux to 2.9e-13
[Wed Jun  6 01:29:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting