[Tue Jun  5 11:00:13 2012] Detection parameters:
  Position = (410.2, 406.1) = 23 53 30.50 -10 15 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.7 +/- 15.4
  Background counts = 32.7
  Rate = 0.004 +/- 0.0005

[Tue Jun  5 11:00:14 2012] Off-axis axis estimate = 11.25'
[Tue Jun  5 15:58:10 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 15:58:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  5 15:58:10 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Tue Jun  5 15:58:10 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.841
[Tue Jun  5 15:58:10 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.05"
[Tue Jun  5 17:13:33 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jun  5 17:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src19.csv
[Tue Jun  5 17:13:33 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jun  5 17:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src19.csv
[Tue Jun  5 17:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:13:34 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jun  5 17:13:34 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jun  5 17:13:34 2012] Fit fullrun_mos2_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Jun  5 17:14:08 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.889151 pixels away
[Tue Jun  5 17:14:08 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:14:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:14:08 2012] Assessing source extent using major
[Tue Jun  5 17:14:08 2012] Source does appear to be extended
[Tue Jun  5 17:14:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 20:56:23 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 20:56:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  5 20:56:23 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Tue Jun  5 20:56:23 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.841
[Tue Jun  5 20:56:23 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.05"
[Tue Jun  5 22:05:54 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src17.ximg exists
[Tue Jun  5 22:05:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src17.csv
[Tue Jun  5 22:05:54 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Jun  5 22:05:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src17.csv
[Tue Jun  5 22:05:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 22:05:54 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Jun  5 22:05:54 2012] fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Jun  5 22:05:54 2012] Fit fullrun_mos2_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Jun  5 22:06:15 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.491378 pixels away
[Tue Jun  5 22:06:15 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 22:06:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 22:06:15 2012] Assessing source extent using major
[Tue Jun  5 22:06:15 2012] Source does appear to be extended
[Tue Jun  5 22:06:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 01:04:24 2012] XMMSAS src. selection expression = ellipse(35640.095825, 35278.733063, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  6 01:04:24 2012] Writing source region out to fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src13_src.reg
[Wed Jun  6 01:04:24 2012] Extracting stamp from image fullrun_mos2_xmm0108460301_pi300-10000_cl_sm2.00.img.gz, (373, 369) - (448, 444)
[Wed Jun  6 01:04:24 2012] XMMSAS bgd. selection expression = annulus(35640.095825, 35278.733063, 1087.500000, 2175.000000, X, Y)
[Wed Jun  6 01:04:24 2012] Writing fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src13.gif
[Wed Jun  6 01:08:28 2012] Mean detx,y = (6786.48, -13863.86) 
[Wed Jun  6 01:08:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 01:08:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 01:08:44 2012] Setting source spectrum file to fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jun  6 01:08:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jun  6 01:27:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  6 01:27:03 2012] rmf not generated due to insufficient counts
[Wed Jun  6 01:28:28 2012] Updating aperture counts using extracted products
[Wed Jun  6 01:28:28 2012] Error reading totcts from fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jun  6 01:28:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 01:28:28 2012] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0108460301_pi300-10000_pass1_cl_src13.arf
[Wed Jun  6 01:28:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 01:28:28 2012] Updating source flux to 9.2e-14
[Wed Jun  6 01:29:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting