[Tue Jun  5 10:59:35 2012] Detection parameters:
  Position = (277.4, 318.7) = 23 54 9.64 -10 21 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.5 +/- 21.1
  Background counts = 77.4
  Rate = 0.007 +/- 0.0007

[Tue Jun  5 10:59:36 2012] Off-axis axis estimate = 2.12'
[Tue Jun  5 13:57:35 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 13:57:35 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Jun  5 13:57:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.267
[Tue Jun  5 13:57:35 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.49"
[Tue Jun  5 15:58:09 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun  5 15:58:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src9.csv
[Tue Jun  5 15:58:09 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun  5 15:58:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src9.csv
[Tue Jun  5 15:58:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 15:58:09 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun  5 15:58:09 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun  5 15:58:09 2012] Fit fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jun  5 17:14:01 2012] Source 14 is offset by -2.868972 and -7.223822 pixels which is larger than
2 X fitted extent = 0.860529 x 0.860529, not incorporating fit results
[Tue Jun  5 17:14:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:14:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:14:01 2012] Assessing source extent using major
[Tue Jun  5 17:14:01 2012] Source does appear to be extended
[Tue Jun  5 17:14:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 19:25:50 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 19:25:50 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Jun  5 19:25:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.267
[Tue Jun  5 19:25:50 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.49"
[Tue Jun  5 20:56:22 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jun  5 20:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src9.csv
[Tue Jun  5 20:56:22 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jun  5 20:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src9.csv
[Tue Jun  5 20:56:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 20:56:23 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jun  5 20:56:23 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jun  5 20:56:23 2012] Fit fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jun  5 22:06:10 2012] Spatial fit model total counts = 555.000000, observed total counts = 555.000000
[Tue Jun  5 22:06:10 2012] Offset between fit and detection position for source 14 = 0.236147 pixels
[Tue Jun  5 22:06:10 2012] 540.456000 total counts/ 425.455000 bgd. counts: snr = 5.575384
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.236147 pixels
  Position = (277.2, 318.6) = 23 54 9.71 -10 21 33.5
  Extent = 4.3 (3.6-5.1)", rotation angle = 0
  Source counts = 115.0 +/- 23.2
  Background counts = 425.5
  Rate = 0.005 +/- 0.001
[Tue Jun  5 22:06:10 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 22:06:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 22:06:10 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 22:06:10 2012] Source does appear to be extended
[Tue Jun  5 22:06:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 00:08:33 2012] XMMSAS src. selection expression = ellipse(24066.023080, 27666.068800, 255.760207, 255.760207, 0.000000, X, Y)
[Wed Jun  6 00:08:33 2012] Writing source region out to fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src14_src.reg
[Wed Jun  6 00:08:33 2012] Extracting stamp from image fullrun_mos1_xmm0108460301_pi300-10000_cl_sm2.00.img.gz, (262, 304) - (292, 333)
[Wed Jun  6 00:08:33 2012] XMMSAS bgd. selection expression = annulus(24066.023080, 27666.068800, 426.267012, 852.534025, X, Y)
[Wed Jun  6 00:08:33 2012] Writing fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src14.gif
[Wed Jun  6 00:10:14 2012] Mean detx,y = (-2249.89, 912.79) 
[Wed Jun  6 00:10:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 00:10:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 00:10:22 2012] Setting source spectrum file to fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun  6 00:10:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jun  6 01:28:27 2012] Updating aperture counts using extracted products
[Wed Jun  6 01:28:27 2012] Error reading totcts from fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun  6 01:28:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 01:28:27 2012] Using photon index=1.80, rate=0.00488, arf fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src14.arf
[Wed Jun  6 01:28:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 01:28:27 2012] Updating source flux to 6.6e-14
[Wed Jun  6 01:28:30 2012] Flag b found in src. 14 procflags, skipping spectral fitting