[Tue Jun  5 10:59:35 2012] Detection parameters:
  Position = (263.9, 267.8) = 23 54 13.61 -10 25 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 936.2 +/- 43.6
  Background counts = 141.5
  Rate = 0.03 +/- 0.002

[Tue Jun  5 10:59:36 2012] Off-axis axis estimate = 3.35'
[Tue Jun  5 13:57:35 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 13:57:35 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Tue Jun  5 13:57:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Tue Jun  5 13:57:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.10"
[Tue Jun  5 15:58:08 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun  5 15:58:08 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun  5 15:58:08 2012] Fit fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jun  5 15:58:09 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun  5 15:58:09 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun  5 15:58:09 2012] Fit fullrun_mos1_xmm0108460301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun  5 17:14:01 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Tue Jun  5 17:14:01 2012] Source 1 is offset by 1.113940 and -1.169206 pixels which is larger than
2 X fitted extent = 3.851035 x 0.993789, not incorporating fit results
[Tue Jun  5 17:14:01 2012] Spatial fit model total counts = 3458.340000, observed total counts = 3389.000000
[Tue Jun  5 17:14:01 2012] Offset between fit and detection position for source 1 = 1.484493 pixels
[Tue Jun  5 17:14:01 2012] Warning, changing simple spatial fit ID from 1 to 7
[Tue Jun  5 17:14:01 2012] 3341.721000 total counts/ 3235.320000 bgd. counts: snr = 1.870627
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.484493 pixels
  Position = (263.0, 269.0) = 23 54 13.88 -10 25 9.2
  Extent = 4.6 (2.0-7.4)", rotation angle = 0
  Source counts = 106.4 +/- 57.8
  Background counts = 3235.3
  Rate = 0.005 +/- 0.002
[Tue Jun  5 17:14:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:14:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:14:01 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 17:14:01 2012] Source does appear to be extended
[Tue Jun  5 17:14:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 17:14:01 2012] Source is confused with source 6
[Tue Jun  5 17:14:01 2012] Source is confused with source 5
[Tue Jun  5 19:25:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  5 19:25:50 2012] Initial guess for spatial extent in simple fitting = 4.61"
[Tue Jun  5 19:25:50 2012] source mask rpix=1.1, npix_max = 9, mask sum = 16, frac = 1.645
[Tue Jun  5 19:25:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.61"
[Tue Jun  5 20:56:22 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun  5 20:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src1.csv
[Tue Jun  5 20:56:22 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun  5 20:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src1.csv
[Tue Jun  5 20:56:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 20:56:22 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun  5 20:56:22 2012] fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun  5 20:56:22 2012] Fit fullrun_mos1_xmm0108460301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun  5 22:06:10 2012] Spatial fit model total counts = 3649.130000, observed total counts = 3599.000000
[Tue Jun  5 22:06:10 2012] Offset between fit and detection position for source 1 = 0.567926 pixels
[Tue Jun  5 22:06:10 2012] 3365.437000 total counts/ 3084.110000 bgd. counts: snr = 5.065782
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.567926 pixels
  Position = (263.1, 268.4) = 23 54 13.86 -10 25 11.7
  Extent = 9.2 (9.2-18.4)", rotation angle = 0
  Source counts = 281.3 +/- 58.0
  Background counts = 3084.1
  Rate = 0.01 +/- 0.002
[Tue Jun  5 22:06:10 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 22:06:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 22:06:10 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 22:06:10 2012] Source does appear to be extended
[Tue Jun  5 22:06:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 00:08:33 2012] XMMSAS src. selection expression = ellipse(22840.105340, 23301.971200, 552.945616, 552.945616, 0.000000, X, Y)
[Wed Jun  6 00:08:33 2012] Writing source region out to fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun  6 00:08:33 2012] Extracting stamp from image fullrun_mos1_xmm0108460301_pi300-10000_cl_sm2.00.img.gz, (231, 237) - (295, 300)
[Wed Jun  6 00:08:33 2012] XMMSAS bgd. selection expression = annulus(22840.105340, 23301.971200, 921.576027, 1843.152053, X, Y) && !ellipse(24819.873600, 23241.866800, 663.903219, 530.396815, 352.280260, X, Y) && !ellipse(23413.664673, 23715.799042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22455.193787, 24068.551544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22562.776000, 23250.800400, 1324.960038, 1324.960038, 0.000000, X, Y) && !ellipse(22995.537384, 23832.378723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.592000, 24312.894000, 1174.312034, 1174.312034, 0.000000, X, Y) && !ellipse(21542.844400, 23515.877400, 1370.352039, 1370.352039, 0.000000, X, Y) && !ellipse(22952.913544, 22236.836212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21276.840000, 23638.659400, 1417.528041, 1417.528041, 0.000000, X, Y) && !ellipse(23010.899384, 25245.815430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21060.588000, 25796.094000, 1316.360038, 1316.360038, 0.000000, X, Y) && !ellipse(22043.903198, 25162.874969, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  6 00:08:33 2012] Writing fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1.gif
[Wed Jun  6 00:08:36 2012] Mean detx,y = (2228.83, 478.69) 
[Wed Jun  6 00:08:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 00:08:46 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 00:08:46 2012] Setting source spectrum file to fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun  6 00:08:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun  6 01:28:27 2012] Updating aperture counts using extracted products
[Wed Jun  6 01:28:27 2012] Error reading totcts from fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun  6 01:28:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 01:28:27 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1.arf
[Wed Jun  6 01:28:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 01:28:27 2012] Updating source flux to 1.3e-13
[Wed Jun  6 01:28:30 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Jun  6 01:28:30 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jun  6 01:29:48 2012] Reading fit data from xmm0108460301/analysis//spectral/fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun  6 01:29:48 2012] Spectral fit parameter nH value = 9.63988e+20
[Wed Jun  6 01:29:48 2012] Spectral fit parameter PhoIndex value = 1.76847
[Wed Jun  6 01:29:48 2012] Failed to get F(0.3-8.0) from xmm0108460301/analysis//spectral/fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun  6 01:29:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 01:29:48 2012] Using Nh = 9.6e+20, photon index=1.77, rate=0.0119, arf fullrun_mos1_xmm0108460301_pi300-10000_pass1_cl_src1.arf
[Wed Jun  6 01:29:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 01:29:48 2012] Updating source flux to 1.4e-13