[Thu Jun  7 08:50:51 2012] Detection parameters:
  Position = (338.7, 321.0) = 23 25 14.78 -12 6 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.3 +/- 7.3
  Background counts = 6.8
  Rate = 0.05 +/- 0.01

[Thu Jun  7 08:50:51 2012] Off-axis axis estimate = 3.35'
[Thu Jun  7 08:52:29 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 08:52:29 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Thu Jun  7 08:52:29 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Thu Jun  7 08:52:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.10"
[Thu Jun  7 09:24:24 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun  7 09:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src3.csv
[Thu Jun  7 09:24:24 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun  7 09:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src3.csv
[Thu Jun  7 09:24:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 09:24:24 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun  7 09:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun  7 09:24:24 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun  7 09:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun  7 09:24:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 12:42:39 2012] Source 3 is offset by 0.394820 and -1.173864 pixels which is larger than
2 X fitted extent = 0.931375 x 0.931375, not incorporating fit results
[Thu Jun  7 12:42:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 12:42:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 12:42:39 2012] Assessing source extent using major
[Thu Jun  7 12:42:39 2012] Source does appear to be extended
[Thu Jun  7 12:42:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 12:42:39 2012] Deleting source due to low Poisson probability 0.9