[Thu Jun  7 08:50:51 2012] Detection parameters:
  Position = (323.0, 307.9) = 23 25 19.44 -12 7 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1065.9 +/- 39.5
  Background counts = 6.4
  Rate = 2 +/- 0.07

[Thu Jun  7 08:50:51 2012] Off-axis axis estimate = 1.91'
[Thu Jun  7 08:52:29 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 08:52:29 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Thu Jun  7 08:52:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Thu Jun  7 08:52:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.38"
[Thu Jun  7 09:24:24 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 09:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 09:24:24 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 09:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 09:24:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 09:24:24 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 09:24:24 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 09:24:24 2012] Fit fullrun_pn_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun  7 12:42:39 2012] Spatial fit model total counts = 2465.530000, observed total counts = 2476.000000
[Thu Jun  7 12:42:39 2012] Offset between fit and detection position for source 1 = 0.624506 pixels
[Thu Jun  7 12:42:39 2012] 2450.160000 total counts/ 1131.990000 bgd. counts: snr = 39.178710
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.624506 pixels
  Position = (322.5, 307.7) = 23 25 19.61 -12 7 27.3
  Extent = 14.4 (13.7-14.8)", rotation angle = 0
  Source counts = 1318.2 +/- 49.5
  Background counts = 1132.0
  Rate = 2 +/- 0.08
[Thu Jun  7 12:42:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 12:42:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 12:42:39 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 12:42:39 2012] Source does appear to be extended
[Thu Jun  7 12:42:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 12:42:39 2012] Source is confused with source 5
[Thu Jun  7 12:43:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  7 12:43:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 12:43:06 2012] Initial guess for spatial extent in simple fitting = 14.43"
[Thu Jun  7 12:43:06 2012] source mask rpix=3.3, npix_max = 58, mask sum = 49, frac = 0.841
[Thu Jun  7 12:43:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.43"
[Thu Jun  7 13:13:17 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  7 13:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 13:13:17 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  7 13:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 13:13:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 13:13:17 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  7 13:13:18 2012] fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  7 13:13:18 2012] Fit fullrun_pn_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  7 16:34:00 2012] Spatial fit model total counts = 3590.770000, observed total counts = 3547.000000
[Thu Jun  7 16:34:00 2012] Offset between fit and detection position for source 1 = 0.391285 pixels
[Thu Jun  7 16:34:00 2012] 3575.160000 total counts/ 1129.570000 bgd. counts: snr = 72.765761
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.391285 pixels
  Position = (322.6, 307.3) = 23 25 19.58 -12 7 29.0
  Extent = 20.0 (18.6-20.9)", rotation angle = 0
  Source counts = 2445.6 +/- 59.8
  Background counts = 1129.6
  Rate = 4 +/- 0.1
[Thu Jun  7 16:34:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 16:34:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 16:34:00 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 16:34:00 2012] Source does appear to be extended
[Thu Jun  7 16:34:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 16:34:16 2012] Counts = 2445.590000, rescaling region sizes by 2.000000
[Thu Jun  7 16:34:16 2012] XMMSAS src. selection expression = ellipse(28014.455000, 26683.873600, 2394.012069, 2394.012069, 0.000000, X, Y)
[Thu Jun  7 16:34:16 2012] Writing source region out to fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  7 16:34:16 2012] Extracting stamp from image fullrun_pn_xmm0108460201_pi300-10000_cl_sm2.00.img.gz, (185, 170) - (460, 445)
[Thu Jun  7 16:34:16 2012] XMMSAS bgd. selection expression = annulus(28014.455000, 26683.873600, 7980.040230, 15960.080459, X, Y) && !ellipse(27409.974000, 26167.782000, 971.896028, 971.896028, 0.000000, X, Y) && !ellipse(26960.725403, 25542.164490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28839.339172, 25550.012756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.140259, 25184.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33391.038200, 13529.790800, 627.137618, 406.986412, 359.582966, X, Y)
[Thu Jun  7 16:34:16 2012] Writing fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1.gif
[Thu Jun  7 16:34:19 2012] Mean detx,y = (590.52, 46.99) 
[Thu Jun  7 16:34:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 16:46:24 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 16:46:25 2012] Setting source spectrum file to fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  7 16:46:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  8 00:43:51 2012] Updating aperture counts using extracted products
[Fri Jun  8 00:43:51 2012] Error reading totcts from fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 00:43:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:43:51 2012] Using photon index=1.80, rate=3.99, arf fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 00:43:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:43:51 2012] Updating source flux to 8.9e-12
[Fri Jun  8 00:45:45 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Jun  8 00:45:59 2012] Reading fit data from xmm0108460201/analysis//spectral/fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  8 00:45:59 2012] Spectral fit parameter nH value = 1.35801e+21
[Fri Jun  8 00:45:59 2012] Spectral fit parameter PhoIndex value = 2.41948
[Fri Jun  8 00:45:59 2012] Failed to get F(0.3-8.0) from xmm0108460201/analysis//spectral/fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 00:45:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:45:59 2012] Using Nh = 1.4e+21, photon index=2.42, rate=3.99, arf fullrun_pn_xmm0108460201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 00:45:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:45:59 2012] Updating source flux to 8.2e-12