[Thu Jun  7 08:51:42 2012] Detection parameters:
  Position = (321.0, 308.2) = 23 25 20.05 -12 7 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7300.4 +/- 100.9
  Background counts = 48.5
  Rate = 0.5 +/- 0.007

[Thu Jun  7 08:51:43 2012] Off-axis axis estimate = 1.78'
[Thu Jun  7 11:36:23 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 11:36:23 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Jun  7 11:36:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.735
[Thu Jun  7 11:36:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Thu Jun  7 12:42:33 2012] fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 12:42:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 12:42:33 2012] fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 12:42:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 12:42:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 12:42:33 2012] fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 12:42:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  7 12:42:33 2012] fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 12:42:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  7 12:42:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 12:42:57 2012] Spatial fit model total counts = 234.426000, observed total counts = 17960.000000
[Thu Jun  7 12:42:57 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  7 12:42:57 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 12:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 12:42:57 2012] Assessing source extent using major
[Thu Jun  7 12:42:57 2012] Source does appear to be extended
[Thu Jun  7 12:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 12:42:57 2012] Source is confused with source 2
[Thu Jun  7 15:32:45 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 15:32:45 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Jun  7 15:32:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.735
[Thu Jun  7 15:32:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.32"
[Thu Jun  7 16:33:57 2012] fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  7 16:33:57 2012] fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  7 16:33:57 2012] Fit fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun  7 16:33:57 2012] fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  7 16:33:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun  7 16:33:57 2012] fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  7 16:33:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun  7 16:33:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 16:34:10 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Thu Jun  7 16:34:10 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.539382 pixels away
[Thu Jun  7 16:34:10 2012] Spatial fit model total counts = 6886.700000, observed total counts = 6296.000000
[Thu Jun  7 16:34:10 2012] Offset between fit and detection position for source 1 = 2.792123 pixels
[Thu Jun  7 16:34:10 2012] Warning, changing simple spatial fit ID from 1 to 5
[Thu Jun  7 16:34:10 2012] 6489.900000 total counts/ 4079.820000 bgd. counts: snr = 37.732098
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.792123 pixels
  Position = (320.8, 305.4) = 23 25 20.11 -12 7 37.1
  Extent = 21.7 (19.6-23.7)", rotation angle = 0
  Source counts = 2410.1 +/- 80.6
  Background counts = 4079.8
  Rate = 0.2 +/- 0.005
[Thu Jun  7 16:34:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 16:34:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 16:34:10 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 16:34:10 2012] Source does appear to be extended
[Thu Jun  7 16:34:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 23:57:42 2012] Counts = 2410.080000, rescaling region sizes by 2.000000
[Thu Jun  7 23:57:42 2012] XMMSAS src. selection expression = ellipse(27861.374000, 26520.910000, 2608.992075, 2608.992075, 0.000000, X, Y)
[Thu Jun  7 23:57:42 2012] Writing source region out to fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  7 23:57:42 2012] Extracting stamp from image fullrun_mos2_xmm0108460201_pi300-10000_cl_sm2.00.img.gz, (171, 155) - (471, 455)
[Thu Jun  7 23:57:42 2012] XMMSAS bgd. selection expression = annulus(27861.374000, 26520.910000, 8696.640250, 17393.280500, X, Y) && !ellipse(28474.782000, 26238.218000, 807.400023, 807.400023, 0.000000, X, Y) && !ellipse(28003.014924, 15009.580075, 662.876113, 387.505616, 359.602415, X, Y) && !ellipse(33389.674600, 13517.454800, 607.672017, 322.185609, 331.845524, X, Y) && !ellipse(26847.688000, 25968.108000, 1070.376031, 1070.376031, 0.000000, X, Y) && !ellipse(26044.334160, 30778.459000, 375.290411, 375.290411, 0.000000, X, Y) && !ellipse(33049.233400, 16104.869800, 410.310412, 410.310412, 0.000000, X, Y) && !ellipse(27552.802246, 24654.827148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38178.256042, 17782.488251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25629.193695, 26137.594635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24453.015400, 39746.472800, 415.229612, 415.229612, 0.000000, X, Y) && !ellipse(29666.052000, 24221.472000, 1267.952036, 1267.952036, 0.000000, X, Y)
[Thu Jun  7 23:57:42 2012] Writing fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1.gif
[Thu Jun  7 23:57:47 2012] Mean detx,y = (-400.60, -186.90) 
[Thu Jun  7 23:57:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 00:06:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 00:06:01 2012] Setting source spectrum file to fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 00:06:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  8 00:43:52 2012] Updating aperture counts using extracted products
[Fri Jun  8 00:43:52 2012] Error reading totcts from fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 00:43:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:43:52 2012] Using photon index=1.80, rate=0.152, arf fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 00:43:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:43:52 2012] Updating source flux to 1.4e-12
[Fri Jun  8 00:44:47 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Jun  8 00:44:47 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Jun  8 00:45:45 2012] Reading fit data from xmm0108460201/analysis//spectral/fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  8 00:45:45 2012] Spectral fit parameter nH value = 1.12346e+21
[Fri Jun  8 00:45:45 2012] Spectral fit parameter PhoIndex value = 2.2677
[Fri Jun  8 00:45:45 2012] Failed to get F(0.3-8.0) from xmm0108460201/analysis//spectral/fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 00:45:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:45:45 2012] Using Nh = 1.1e+21, photon index=2.27, rate=0.152, arf fullrun_mos2_xmm0108460201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 00:45:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:45:45 2012] Updating source flux to 1.3e-12