[Thu Jun  7 08:51:18 2012] Detection parameters:
  Position = (322.2, 307.1) = 23 25 19.68 -12 7 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8856.3 +/- 113.9
  Background counts = 43.8
  Rate = 0.6 +/- 0.007

[Thu Jun  7 08:51:18 2012] Off-axis axis estimate = 1.83'
[Thu Jun  7 09:24:25 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 09:24:25 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Thu Jun  7 09:24:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Thu Jun  7 09:24:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.35"
[Thu Jun  7 11:36:22 2012] fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 11:36:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 11:36:22 2012] fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 11:36:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 11:36:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:36:22 2012] fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 11:36:22 2012] fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 11:36:22 2012] Fit fullrun_mos1_xmm0108460201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun  7 12:42:49 2012] Spatial fit model total counts = 21682.600000, observed total counts = 21699.000000
[Thu Jun  7 12:42:49 2012] Offset between fit and detection position for source 1 = 0.744195 pixels
[Thu Jun  7 12:42:49 2012] 21629.020000 total counts/ 9836.420000 bgd. counts: snr = 118.902514
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.744195 pixels
  Position = (322.5, 307.7) = 23 25 19.59 -12 7 27.0
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 11792.6 +/- 147.1
  Background counts = 9836.4
  Rate = 0.7 +/- 0.009
[Thu Jun  7 12:42:49 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 12:42:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 12:42:49 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 12:42:49 2012] Source does appear to be extended
[Thu Jun  7 12:42:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 13:13:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  7 13:13:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 13:13:18 2012] Initial guess for spatial extent in simple fitting = 14.69"
[Thu Jun  7 13:13:18 2012] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.931
[Thu Jun  7 13:13:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.69"
[Thu Jun  7 15:32:44 2012] fullrun_mos1_xmm0108460201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  7 15:32:44 2012] fullrun_mos1_xmm0108460201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  7 15:32:44 2012] Fit fullrun_mos1_xmm0108460201_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun  7 15:32:44 2012] fullrun_mos1_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  7 15:32:44 2012] fullrun_mos1_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  7 15:32:44 2012] Fit fullrun_mos1_xmm0108460201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  7 16:34:06 2012] Spatial fit model total counts = 32260.600000, observed total counts = 32250.000000
[Thu Jun  7 16:34:06 2012] Offset between fit and detection position for source 1 = 0.414781 pixels
[Thu Jun  7 16:34:06 2012] 31967.000000 total counts/ 10004.300000 bgd. counts: snr = 219.579795
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.414781 pixels
  Position = (322.6, 307.3) = 23 25 19.58 -12 7 28.8
  Extent = 20.3 (20.0-20.7)", rotation angle = 0
  Source counts = 21962.7 +/- 178.8
  Background counts = 10004.3
  Rate = 1 +/- 0.01
[Thu Jun  7 16:34:06 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 16:34:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 16:34:06 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 16:34:06 2012] Source does appear to be extended
[Thu Jun  7 16:34:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 21:25:07 2012] Counts = 21962.700000, rescaling region sizes by 3.000000
[Thu Jun  7 21:25:07 2012] XMMSAS src. selection expression = ellipse(28015.658520, 26687.599600, 3647.340105, 3647.340105, 0.000000, X, Y)
[Thu Jun  7 21:25:07 2012] Writing source region out to fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  7 21:25:07 2012] Extracting stamp from image fullrun_mos1_xmm0108460201_pi300-10000_cl_sm2.00.img.gz, (113, 98) - (532, 517)
[Thu Jun  7 21:25:07 2012] XMMSAS bgd. selection expression = annulus(28015.658520, 26687.599600, 18236.700525, 36473.401050, X, Y) && !ellipse(33417.098206, 13525.685089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29883.442000, 27946.276000, 1383.056040, 1383.056040, 0.000000, X, Y) && !ellipse(33063.798000, 16107.228000, 495.505614, 495.505614, 0.000000, X, Y) && !ellipse(28921.560000, 28266.440000, 762.939222, 762.939222, 0.000000, X, Y) && !ellipse(26058.272980, 30764.684113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28017.218400, 15027.730200, 410.532812, 410.532812, 0.000000, X, Y) && !ellipse(30833.624603, 27117.531433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27900.462402, 28819.421143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38146.286200, 17818.762200, 927.248027, 927.248027, 0.000000, X, Y) && !ellipse(26992.216000, 27633.784000, 1091.856031, 1091.856031, 0.000000, X, Y) && !ellipse(30086.079865, 26843.704987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28297.498138, 28699.060699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24439.269080, 39717.575000, 557.525616, 557.525616, 0.000000, X, Y) && !ellipse(29938.186000, 28644.470000, 1310.968038, 1310.968038, 0.000000, X, Y) && !ellipse(25537.842102, 26567.114655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29852.763855, 25875.190125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26326.630066, 24409.494476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30361.844482, 27914.674774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29020.276764, 28822.469116, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  7 21:25:07 2012] Writing fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1.gif
[Thu Jun  7 21:25:11 2012] Mean detx,y = (85.04, 284.35) 
[Thu Jun  7 21:25:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 21:29:46 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 21:29:46 2012] Setting source spectrum file to fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  7 21:29:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  8 00:43:51 2012] Updating aperture counts using extracted products
[Fri Jun  8 00:43:51 2012] Error reading totcts from fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 00:43:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:43:52 2012] Using photon index=1.80, rate=1.38, arf fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 00:43:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:43:52 2012] Updating source flux to 1.2e-11
[Fri Jun  8 00:44:47 2012] Reading fit data from xmm0108460201/analysis//spectral/fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  8 00:44:47 2012] Spectral fit parameter nH value = 9.85878e+20
[Fri Jun  8 00:44:47 2012] Spectral fit parameter PhoIndex value = 2.17255
[Fri Jun  8 00:44:47 2012] Failed to get F(0.3-8.0) from xmm0108460201/analysis//spectral/fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 00:44:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:44:47 2012] Using Nh = 9.9e+20, photon index=2.17, rate=1.38, arf fullrun_mos1_xmm0108460201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 00:44:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:44:47 2012] Updating source flux to 1.1e-11