[Wed Aug 15 05:11:42 2012] Detection parameters:
  Position = (268.2, 270.1) = 13 41 58.13 26 20 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.3 +/- 26.4
  Background counts = 191.0
  Rate = 0.007 +/- 0.001

[Wed Aug 15 05:11:42 2012] Off-axis axis estimate = 3.00'
[Wed Aug 15 05:15:07 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 05:15:07 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Wed Aug 15 05:15:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.926
[Wed Aug 15 05:15:07 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.93"
[Wed Aug 15 07:46:34 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src49.ximg exists
[Wed Aug 15 07:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src49.csv
[Wed Aug 15 07:46:34 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src49_1.ximg exists
[Wed Aug 15 07:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src49.csv
[Wed Aug 15 07:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 07:46:35 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Wed Aug 15 07:46:35 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Wed Aug 15 07:46:35 2012] Fit fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Wed Aug 15 13:10:37 2012] Source 50 is offset by -3.968824 and -8.190104 pixels which is larger than
2 X fitted extent = 5.593747 x 5.593747, not incorporating fit results
[Wed Aug 15 13:10:37 2012] Spatial fit model total counts = 1993.940000, observed total counts = 1802.000000
[Wed Aug 15 13:10:37 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 13:10:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:37 2012] Assessing source extent using major
[Wed Aug 15 13:10:37 2012] Source does appear to be extended
[Wed Aug 15 13:10:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:11:29 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 13:11:29 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Wed Aug 15 13:11:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.926
[Wed Aug 15 13:11:29 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.93"
[Wed Aug 15 15:39:53 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_src31.ximg exists
[Wed Aug 15 15:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_src31.csv
[Wed Aug 15 15:39:53 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Aug 15 15:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_src31.csv
[Wed Aug 15 15:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:39:53 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Aug 15 15:39:53 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Aug 15 15:39:54 2012] Fit fullrun_pn_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Aug 15 20:19:12 2012] Source 50 is offset by 6.055084 and 4.173046 pixels which is larger than
2 X fitted extent = 2.341168 x 2.341168, not incorporating fit results
[Wed Aug 15 20:19:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:12 2012] Assessing source extent using major
[Wed Aug 15 20:19:12 2012] Source does appear to be extended
[Wed Aug 15 20:19:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 20:19:41 2012] XMMSAS src. selection expression = ellipse(23285.376312, 23450.404968, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 20:19:41 2012] Writing source region out to fullrun_pn_xmm0108460101_pi300-10000_pass1_cl_src50_src.reg
[Wed Aug 15 20:19:41 2012] Extracting stamp from image fullrun_pn_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (231, 233) - (306, 308)
[Wed Aug 15 20:19:41 2012] XMMSAS bgd. selection expression = annulus(23285.376312, 23450.404968, 1087.500000, 2175.000000, X, Y) && !ellipse(25836.561600, 25615.010264, 1050.528030, 1050.528030, 0.000000, X, Y) && !ellipse(24300.070099, 26305.997833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.773956, 25880.932953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23040.679800, 24394.499200, 396.088011, 396.088011, 0.000000, X, Y) && !ellipse(26220.720947, 23969.999512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24333.026600, 25006.840810, 1160.600033, 1160.600033, 0.000000, X, Y) && !ellipse(24693.731293, 23195.684113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23850.573639, 22797.764252, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 20:19:41 2012] Writing fullrun_pn_xmm0108460101_pi300-10000_pass1_cl_src50.gif
[Wed Aug 15 20:44:10 2012] Mean detx,y = (2252.24, 241.74) 
[Wed Aug 15 20:44:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 20:44:39 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 20:44:40 2012] Setting source spectrum file to fullrun_pn_xmm0108460101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Aug 15 20:44:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108460101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Wed Aug 15 22:48:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 22:48:26 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:26:00 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:00 2012] Error reading totcts from fullrun_pn_xmm0108460101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Aug 16 02:26:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:02 2012] Using photon index=1.80, rate=0.00718, arf fullrun_pn_xmm0108460101_pi300-10000_pass1_cl_src50.arf
[Thu Aug 16 02:26:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:02 2012] Updating source flux to 1.8e-14
[Thu Aug 16 02:28:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting