[Wed Aug 15 05:11:42 2012] Detection parameters:
  Position = (262.7, 386.7) = 13 41 59.92 26 29 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.4 +/- 14.3
  Background counts = 52.1
  Rate = 0.004 +/- 0.0009

[Wed Aug 15 05:11:42 2012] Off-axis axis estimate = 6.91'
[Wed Aug 15 05:15:07 2012] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 05:15:07 2012] Initial guess for spatial extent in simple fitting = 9.88"
[Wed Aug 15 05:15:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.976
[Wed Aug 15 05:15:07 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.88"
[Wed Aug 15 07:46:33 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src22.ximg exists
[Wed Aug 15 07:46:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src22.csv
[Wed Aug 15 07:46:33 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Aug 15 07:46:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src22.csv
[Wed Aug 15 07:46:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 07:46:34 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Aug 15 07:46:34 2012] fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Aug 15 07:46:35 2012] Fit fullrun_pn_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Aug 15 13:10:37 2012] Spatial fit model total counts = 490.541000, observed total counts = 491.000000
[Wed Aug 15 13:10:37 2012] Offset between fit and detection position for source 23 = 0.663799 pixels
[Wed Aug 15 13:10:37 2012] Warning, changing simple spatial fit ID from 22 to 20
[Wed Aug 15 13:10:37 2012] 468.943900 total counts/ 456.711000 bgd. counts: snr = 0.572412
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.663799 pixels
  Position = (262.3, 386.2) = 13 42 0.06 26 29 0.6
  Extent = 2.5" x 2.5", rotation angle = 0
  Source counts = 12.2 +/- 21.7
  Background counts = 456.7
  Rate = 0.0005 +/- 0.0009
  Deleting source due to low Poisson probability