[Wed Aug 15 05:12:41 2012] Detection parameters:
  Position = (285.5, 269.1) = 13 41 52.55 26 20 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.9 +/- 15.6
  Background counts = 90.3
  Rate = 0.003 +/- 0.0006

[Wed Aug 15 05:12:41 2012] Off-axis axis estimate = 2.33'
[Wed Aug 15 10:18:59 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:18:59 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Wed Aug 15 10:18:59 2012] source mask rpix=1.7, npix_max = 20, mask sum = 17, frac = 0.843
[Wed Aug 15 10:18:59 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 7.59"
[Wed Aug 15 13:10:13 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src41.ximg exists
[Wed Aug 15 13:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src41.csv
[Wed Aug 15 13:10:13 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src41_1.ximg exists
[Wed Aug 15 13:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src41.csv
[Wed Aug 15 13:10:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:14 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Wed Aug 15 13:10:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Wed Aug 15 13:10:14 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Wed Aug 15 13:10:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Wed Aug 15 13:10:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:11:06 2012] Warning, spatial fit 41 centroid is now closest to src. 39
[Wed Aug 15 13:11:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:11:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:11:06 2012] Assessing source extent using major
[Wed Aug 15 13:11:06 2012] Source does appear to be extended
[Wed Aug 15 13:11:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:11:06 2012] Source is confused with source 39
[Wed Aug 15 17:54:46 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:54:46 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Wed Aug 15 17:54:46 2012] source mask rpix=1.7, npix_max = 20, mask sum = 17, frac = 0.843
[Wed Aug 15 17:54:46 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 7.59"
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src36.ximg exists
[Wed Aug 15 20:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src36.csv
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src36_1.ximg exists
[Wed Aug 15 20:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src36.csv
[Wed Aug 15 20:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Wed Aug 15 20:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Wed Aug 15 20:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Aug 15 20:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:19:28 2012] Warning, spatial fit 36 centroid is now closest to src. 39
[Wed Aug 15 20:19:28 2012] Source 45 is offset by 6.062523 and 4.172700 pixels which is larger than
2 X fitted extent = 2.439209 x 2.439209, not incorporating fit results
[Wed Aug 15 20:19:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:28 2012] Assessing source extent using major
[Wed Aug 15 20:19:28 2012] Source does appear to be extended
[Wed Aug 15 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 00:43:22 2012] XMMSAS src. selection expression = ellipse(24787.063538, 23361.588928, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 00:43:22 2012] Writing source region out to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src45_src.reg
[Thu Aug 16 00:43:22 2012] Extracting stamp from image fullrun_mos2_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (248, 232) - (323, 307)
[Thu Aug 16 00:43:22 2012] XMMSAS bgd. selection expression = annulus(24787.063538, 23361.588928, 1087.500000, 2175.000000, X, Y) && !ellipse(25801.659340, 25536.847200, 1673.088048, 1673.088048, 0.000000, X, Y) && !ellipse(24757.090912, 25113.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.925934, 24921.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.866608, 26238.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.104309, 25350.333313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.863556, 23954.379974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.040393, 26791.097874, 1561.447783, 925.618107, 90.000000, X, Y) && !ellipse(22782.644000, 26201.300000, 1266.400036, 1266.400036, 0.000000, X, Y) && !ellipse(25714.866000, 26208.386000, 1078.232031, 1078.232031, 0.000000, X, Y) && !ellipse(23521.716000, 24107.618000, 1266.816036, 1266.816036, 0.000000, X, Y) && !ellipse(22573.329315, 24667.908478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.000000, 23262.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27091.188232, 25009.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.583588, 25780.564880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27208.184753, 26157.544525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22078.491592, 25071.749054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23938.282532, 23554.596283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26813.746000, 23289.422000, 1174.160034, 1174.160034, 0.000000, X, Y) && !ellipse(21839.768000, 23828.082000, 1288.568037, 1288.568037, 0.000000, X, Y) && !ellipse(23032.898000, 22870.684000, 2533.632073, 2533.632073, 0.000000, X, Y)
[Thu Aug 16 00:43:22 2012] Writing fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src45.gif
[Thu Aug 16 01:00:25 2012] Mean detx,y = (-809.96, 273.00) 
[Thu Aug 16 01:00:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 01:00:37 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 01:00:37 2012] Setting source spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Aug 16 01:00:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Aug 16 01:46:50 2012] Not generating rmf since there are only 77 counts
[Thu Aug 16 01:46:50 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:26:05 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:05 2012] Error reading totcts from fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Aug 16 02:26:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:06 2012] Using photon index=1.80, rate=0.00288, arf fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src45.arf
[Thu Aug 16 02:26:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:06 2012] Updating source flux to 3e-14
[Thu Aug 16 02:27:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting