[Wed Aug 15 05:12:41 2012] Detection parameters:
  Position = (283.0, 275.9) = 13 41 53.35 26 21 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.4 +/- 22.2
  Background counts = 98.3
  Rate = 0.008 +/- 0.0008

[Wed Aug 15 05:12:41 2012] Off-axis axis estimate = 1.98'
[Wed Aug 15 10:18:59 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:18:59 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Wed Aug 15 10:18:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.719
[Wed Aug 15 10:18:59 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.42"
[Wed Aug 15 13:10:12 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Aug 15 13:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src11.csv
[Wed Aug 15 13:10:12 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Aug 15 13:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src11.csv
[Wed Aug 15 13:10:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:13 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Aug 15 13:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug 15 13:10:13 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Aug 15 13:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug 15 13:10:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:11:06 2012] Warning, spatial fit 11 centroid is now closest to src. 41
[Wed Aug 15 13:11:06 2012] Source 39 is offset by 4.480455 and -0.615587 pixels which is larger than
2 X fitted extent = 0.813844 x 0.813844, not incorporating fit results
[Wed Aug 15 13:11:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:11:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:11:06 2012] Assessing source extent using major
[Wed Aug 15 13:11:06 2012] Source does appear to be extended
[Wed Aug 15 13:11:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:11:06 2012] Source is confused with source 45
[Wed Aug 15 17:54:45 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:54:45 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Wed Aug 15 17:54:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.719
[Wed Aug 15 17:54:45 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.42"
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src10.ximg exists
[Wed Aug 15 20:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Aug 15 20:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 20:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Aug 15 20:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Aug 15 20:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Aug 15 20:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:19:28 2012] Warning, spatial fit 10 centroid is now closest to src. 41
[Wed Aug 15 20:19:28 2012] Source 39 is offset by 4.950799 and -1.085931 pixels which is larger than
2 X fitted extent = 0.872639 x 0.872639, not incorporating fit results
[Wed Aug 15 20:19:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:28 2012] Assessing source extent using major
[Wed Aug 15 20:19:28 2012] Source does appear to be extended
[Wed Aug 15 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 00:43:21 2012] XMMSAS src. selection expression = ellipse(24569.863556, 23954.379974, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 00:43:21 2012] Writing source region out to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src39_src.reg
[Thu Aug 16 00:43:21 2012] Extracting stamp from image fullrun_mos2_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (245, 238) - (320, 313)
[Thu Aug 16 00:43:21 2012] XMMSAS bgd. selection expression = annulus(24569.863556, 23954.379974, 1087.500000, 2175.000000, X, Y) && !ellipse(25801.659340, 25536.847200, 1673.088048, 1673.088048, 0.000000, X, Y) && !ellipse(24757.090912, 25113.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.925934, 24921.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.866608, 26238.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.104309, 25350.333313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.040393, 26791.097874, 1561.447783, 925.618107, 90.000000, X, Y) && !ellipse(22782.644000, 26201.300000, 1266.400036, 1266.400036, 0.000000, X, Y) && !ellipse(25714.866000, 26208.386000, 1078.232031, 1078.232031, 0.000000, X, Y) && !ellipse(25030.136780, 26913.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23521.716000, 24107.618000, 1266.816036, 1266.816036, 0.000000, X, Y) && !ellipse(22573.329315, 24667.908478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.079651, 26728.205902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.000000, 23262.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27091.188232, 25009.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.583588, 25780.564880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27208.184753, 26157.544525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22078.491592, 25071.749054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.726013, 26478.375610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24787.063538, 23361.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23938.282532, 23554.596283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26813.746000, 23289.422000, 1174.160034, 1174.160034, 0.000000, X, Y) && !ellipse(21839.768000, 23828.082000, 1288.568037, 1288.568037, 0.000000, X, Y) && !ellipse(23032.898000, 22870.684000, 2533.632073, 2533.632073, 0.000000, X, Y)
[Thu Aug 16 00:43:21 2012] Writing fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src39.gif
[Thu Aug 16 00:54:49 2012] Mean detx,y = (-797.78, -356.44) 
[Thu Aug 16 00:54:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 00:54:59 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 00:54:59 2012] Setting source spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug 16 00:54:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Aug 16 01:12:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 01:12:07 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:26:04 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:04 2012] Error reading totcts from fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug 16 02:26:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:05 2012] Using photon index=1.80, rate=0.00771, arf fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src39.arf
[Thu Aug 16 02:26:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:05 2012] Updating source flux to 8e-14
[Thu Aug 16 02:27:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting