[Wed Aug 15 05:12:41 2012] Detection parameters:
  Position = (257.6, 279.6) = 13 42 1.56 26 21 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.7 +/- 17.0
  Background counts = 86.1
  Rate = 0.002 +/- 0.0006

[Wed Aug 15 05:12:41 2012] Off-axis axis estimate = 3.26'
[Wed Aug 15 10:18:59 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:18:59 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Wed Aug 15 10:18:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.129
[Wed Aug 15 10:18:59 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.06"
[Wed Aug 15 13:10:13 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src47.ximg exists
[Wed Aug 15 13:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src47.csv
[Wed Aug 15 13:10:13 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed Aug 15 13:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src47.csv
[Wed Aug 15 13:10:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:14 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed Aug 15 13:10:14 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed Aug 15 13:10:14 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Wed Aug 15 13:11:06 2012] Spatial fit model total counts = 1242.210000, observed total counts = 1242.000000
[Wed Aug 15 13:11:06 2012] Offset between fit and detection position for source 36 = 7.919025 pixels
[Wed Aug 15 13:11:06 2012] 1252.559000 total counts/ 1030.420000 bgd. counts: snr = 6.920184
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 7.919025 pixels
  Position = (251.6, 274.4) = 13 42 3.51 26 20 54.4
  Extent = 16.1 (16.1-16.1)", rotation angle = 0
  Source counts = 222.1 +/- 35.4
  Background counts = 1030.4
  Rate = 0.008 +/- 0.001
[Wed Aug 15 13:11:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:11:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:11:06 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 13:11:06 2012] Source does appear to be extended
[Wed Aug 15 13:11:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:54:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:54:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 17:54:46 2012] Initial guess for spatial extent in simple fitting = 16.11"
[Wed Aug 15 17:54:46 2012] source mask rpix=3.7, npix_max = 70, mask sum = 81, frac = 1.146
[Wed Aug 15 17:54:46 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 16.11"
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src41.ximg exists
[Wed Aug 15 20:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src41.csv
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Aug 15 20:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src41.csv
[Wed Aug 15 20:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Aug 15 20:19:01 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed Aug 15 20:19:28 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 14.427069 pixels away
[Wed Aug 15 20:19:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:28 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 20:19:28 2012] Source does appear to be extended
[Wed Aug 15 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 20:19:28 2012] Source is confused with source 43
[Thu Aug 16 00:43:22 2012] XMMSAS src. selection expression = ellipse(21839.768000, 23828.082000, 966.426028, 966.426028, 0.000000, X, Y)
[Thu Aug 16 00:43:22 2012] Writing source region out to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src36_src.reg
[Thu Aug 16 00:43:22 2012] Extracting stamp from image fullrun_mos2_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (196, 219) - (307, 330)
[Thu Aug 16 00:43:22 2012] XMMSAS bgd. selection expression = annulus(21839.768000, 23828.082000, 1610.710046, 3221.420093, X, Y) && !ellipse(25801.659340, 25536.847200, 1673.088048, 1673.088048, 0.000000, X, Y) && !ellipse(24757.090912, 25113.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.925934, 24921.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.866608, 26238.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.104309, 25350.333313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.863556, 23954.379974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.040393, 26791.097874, 1561.447783, 925.618107, 90.000000, X, Y) && !ellipse(22782.644000, 26201.300000, 1266.400036, 1266.400036, 0.000000, X, Y) && !ellipse(25714.866000, 26208.386000, 1078.232031, 1078.232031, 0.000000, X, Y) && !ellipse(25030.136780, 26913.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23521.716000, 24107.618000, 1266.816036, 1266.816036, 0.000000, X, Y) && !ellipse(22573.329315, 24667.908478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23310.992035, 27228.100128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.079651, 26728.205902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24120.000702, 27674.232666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.000000, 23262.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25707.891418, 27259.110870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.583588, 25780.564880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22078.491592, 25071.749054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25151.162000, 27293.434000, 1089.216031, 1089.216031, 0.000000, X, Y) && !ellipse(24787.063538, 23361.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18504.656219, 21660.969650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23938.282532, 23554.596283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23032.898000, 22870.684000, 2533.632073, 2533.632073, 0.000000, X, Y)
[Thu Aug 16 00:43:22 2012] Writing fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src36.gif
[Thu Aug 16 01:02:09 2012] Mean detx,y = (-3204.03, -1268.85) 
[Thu Aug 16 01:02:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 01:02:22 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 01:02:22 2012] Setting source spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Aug 16 01:02:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Aug 16 02:26:05 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:05 2012] Error reading totcts from fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Aug 16 02:26:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:06 2012] Using photon index=1.80, rate=0.00782, arf fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src36.arf
[Thu Aug 16 02:26:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:06 2012] Updating source flux to 7.5e-14
[Thu Aug 16 02:27:09 2012] Flag c found in src. 36 procflags, skipping spectral fitting