[Wed Aug 15 05:12:41 2012] Detection parameters:
  Position = (312.0, 288.0) = 13 41 43.97 26 21 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.6 +/- 19.5
  Background counts = 101.4
  Rate = 0.003 +/- 0.0006

[Wed Aug 15 05:12:41 2012] Off-axis axis estimate = 1.24'
[Wed Aug 15 10:18:59 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:18:59 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Wed Aug 15 10:18:59 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Wed Aug 15 10:18:59 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.05"
[Wed Aug 15 13:10:12 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src33.ximg exists
[Wed Aug 15 13:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src33.csv
[Wed Aug 15 13:10:12 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Aug 15 13:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src33.csv
[Wed Aug 15 13:10:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:14 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Aug 15 13:10:14 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Aug 15 13:10:14 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Aug 15 13:11:06 2012] Source 31 is offset by 6.430347 and -5.352881 pixels which is larger than
2 X fitted extent = 5.039586 x 5.039586, not incorporating fit results
[Wed Aug 15 13:11:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:11:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:11:06 2012] Assessing source extent using major
[Wed Aug 15 13:11:06 2012] Source does appear to be extended
[Wed Aug 15 13:11:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:11:06 2012] Source is confused with source 33
[Wed Aug 15 17:54:46 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:54:46 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Wed Aug 15 17:54:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Wed Aug 15 17:54:46 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.05"
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src28.ximg exists
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Aug 15 20:19:00 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src28 appears to have run properly
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Aug 15 20:19:01 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Aug 15 20:19:28 2012] Source 31 is offset by -6.495400 and 4.488889 pixels which is larger than
2 X fitted extent = 6.479908 x 6.479908, not incorporating fit results
[Wed Aug 15 20:19:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:28 2012] Assessing source extent using major
[Wed Aug 15 20:19:28 2012] Source does appear to be extended
[Wed Aug 15 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 00:43:21 2012] XMMSAS src. selection expression = ellipse(27091.188232, 25009.937317, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 00:43:21 2012] Writing source region out to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src31_src.reg
[Thu Aug 16 00:43:21 2012] Extracting stamp from image fullrun_mos2_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (274, 251) - (349, 326)
[Thu Aug 16 00:43:21 2012] XMMSAS bgd. selection expression = annulus(27091.188232, 25009.937317, 1087.500000, 2175.000000, X, Y) && !ellipse(25801.659340, 25536.847200, 1673.088048, 1673.088048, 0.000000, X, Y) && !ellipse(24757.090912, 25113.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.866608, 26238.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.863556, 23954.379974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.040393, 26791.097874, 1561.447783, 925.618107, 90.000000, X, Y) && !ellipse(25714.866000, 26208.386000, 1078.232031, 1078.232031, 0.000000, X, Y) && !ellipse(25030.136780, 26913.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24120.000702, 27674.232666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.898000, 27286.614000, 614.951218, 614.951218, 0.000000, X, Y) && !ellipse(25225.000000, 23262.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25707.891418, 27259.110870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27208.184753, 26157.544525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.726013, 26478.375610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25151.162000, 27293.434000, 1089.216031, 1089.216031, 0.000000, X, Y) && !ellipse(24787.063538, 23361.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26813.746000, 23289.422000, 1174.160034, 1174.160034, 0.000000, X, Y) && !ellipse(23032.898000, 22870.684000, 2533.632073, 2533.632073, 0.000000, X, Y)
[Thu Aug 16 00:43:21 2012] Writing fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src31.gif
[Thu Aug 16 00:58:37 2012] Mean detx,y = (1888.92, -400.20) 
[Thu Aug 16 00:58:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 00:58:48 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 00:58:48 2012] Setting source spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Aug 16 00:58:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Aug 16 01:39:38 2012] Not generating rmf since there are only 98 counts
[Thu Aug 16 01:39:38 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:26:05 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:05 2012] Error reading totcts from fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Aug 16 02:26:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:06 2012] Using photon index=1.80, rate=0.00323, arf fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src31.arf
[Thu Aug 16 02:26:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:06 2012] Updating source flux to 3.2e-14
[Thu Aug 16 02:27:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting