[Wed Aug 15 05:12:41 2012] Detection parameters:
  Position = (279.0, 308.0) = 13 41 54.65 26 23 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.5 +/- 26.4
  Background counts = 133.8
  Rate = 0.007 +/- 0.0009

[Wed Aug 15 05:12:41 2012] Off-axis axis estimate = 1.57'
[Wed Aug 15 10:18:59 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:18:59 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Wed Aug 15 10:18:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Wed Aug 15 10:18:59 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.21"
[Wed Aug 15 13:10:12 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src12.ximg exists
[Wed Aug 15 13:10:12 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Aug 15 13:10:12 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src12 appears to have run properly
[Wed Aug 15 13:10:13 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Aug 15 13:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Aug 15 13:10:13 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Aug 15 13:10:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Aug 15 13:10:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:11:06 2012] Warning, spatial fit 12 centroid is now closest to src. 12
[Wed Aug 15 13:11:06 2012] Source 20 is offset by -0.497150 and -4.137054 pixels which is larger than
2 X fitted extent = 1.066212 x 1.066212, not incorporating fit results
[Wed Aug 15 13:11:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:11:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:11:06 2012] Assessing source extent using major
[Wed Aug 15 13:11:06 2012] Source does appear to be extended
[Wed Aug 15 13:11:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:11:06 2012] Source is confused with source 23
[Wed Aug 15 17:54:45 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:54:45 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Wed Aug 15 17:54:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Wed Aug 15 17:54:45 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.21"
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Aug 15 20:19:00 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src11 appears to have run properly
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Aug 15 20:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Aug 15 20:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Aug 15 20:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:19:28 2012] Spatial fit model total counts = 2648.400000, observed total counts = 2403.000000
[Wed Aug 15 20:19:28 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 20:19:28 2012] Spatial fit model total counts = 2251.830000, observed total counts = 2068.000000
[Wed Aug 15 20:19:28 2012] Offset between fit and detection position for source 20 = 0.980533 pixels
[Wed Aug 15 20:19:28 2012] 2233.321000 total counts/ 1981.850000 bgd. counts: snr = 5.648752
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.980533 pixels
  Position = (278.1, 308.5) = 13 41 54.92 26 23 22.6
  Extent = 19.5" x 11.6", rotation angle = 90
  Source counts = 251.5 +/- 47.3
  Background counts = 1981.8
  Rate = 0.009 +/- 0.002
[Wed Aug 15 20:19:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:28 2012] Assessing source extent using major
[Wed Aug 15 20:19:28 2012] Source does appear to be extended
[Wed Aug 15 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.69
[Wed Aug 15 20:19:28 2012] Source is asymmetric
[Thu Aug 16 00:43:21 2012] XMMSAS src. selection expression = ellipse(24149.040393, 26791.097874, 1171.085837, 694.213580, 90.000000, X, Y)
[Thu Aug 16 00:43:21 2012] Writing source region out to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src20_src.reg
[Thu Aug 16 00:43:21 2012] Extracting stamp from image fullrun_mos2_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (211, 241) - (345, 376)
[Thu Aug 16 00:43:21 2012] XMMSAS bgd. selection expression = annulus(24149.040393, 26791.097874, 1951.809729, 3903.619457, X, Y) && !ellipse(25801.659340, 25536.847200, 1673.088048, 1673.088048, 0.000000, X, Y) && !ellipse(24757.090912, 25113.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.925934, 24921.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.866608, 26238.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.104309, 25350.333313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.863556, 23954.379974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22782.644000, 26201.300000, 1266.400036, 1266.400036, 0.000000, X, Y) && !ellipse(25714.866000, 26208.386000, 1078.232031, 1078.232031, 0.000000, X, Y) && !ellipse(25030.136780, 26913.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23521.716000, 24107.618000, 1266.816036, 1266.816036, 0.000000, X, Y) && !ellipse(22573.329315, 24667.908478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23310.992035, 27228.100128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.079651, 26728.205902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24120.000702, 27674.232666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.898000, 27286.614000, 614.951218, 614.951218, 0.000000, X, Y) && !ellipse(20776.767899, 27957.582703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.000000, 23262.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25707.891418, 27259.110870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27091.188232, 25009.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.583588, 25780.564880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27208.184753, 26157.544525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22078.491592, 25071.749054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.726013, 26478.375610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25151.162000, 27293.434000, 1089.216031, 1089.216031, 0.000000, X, Y) && !ellipse(24787.063538, 23361.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23938.282532, 23554.596283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26813.746000, 23289.422000, 1174.160034, 1174.160034, 0.000000, X, Y) && !ellipse(21839.768000, 23828.082000, 1288.568037, 1288.568037, 0.000000, X, Y) && !ellipse(23032.898000, 22870.684000, 2533.632073, 2533.632073, 0.000000, X, Y)
[Thu Aug 16 00:43:21 2012] Writing fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src20.gif
[Thu Aug 16 00:55:03 2012] Mean detx,y = (-118.96, -3016.87) 
[Thu Aug 16 00:55:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 00:55:17 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 00:55:17 2012] Setting source spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Aug 16 00:55:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Aug 16 02:26:04 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:04 2012] Error reading totcts from fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Aug 16 02:26:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:05 2012] Using photon index=1.80, rate=0.00885, arf fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src20.arf
[Thu Aug 16 02:26:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:05 2012] Updating source flux to 9.5e-14
[Thu Aug 16 02:27:09 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Thu Aug 16 02:27:09 2012] Flag p found in src. 20 procflags, skipping spectral fitting
[Thu Aug 16 02:27:09 2012] Flag c found in src. 20 procflags, skipping spectral fitting