[Wed Aug 15 05:12:41 2012] Detection parameters:
  Position = (296.1, 313.9) = 13 41 49.12 26 23 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.3 +/- 21.0
  Background counts = 130.1
  Rate = 0.004 +/- 0.0007

[Wed Aug 15 05:12:41 2012] Off-axis axis estimate = 1.13'
[Wed Aug 15 10:18:59 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:18:59 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Wed Aug 15 10:18:59 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Wed Aug 15 10:18:59 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.00"
[Wed Aug 15 13:10:12 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src31.ximg exists
[Wed Aug 15 13:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src31.csv
[Wed Aug 15 13:10:12 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Aug 15 13:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src31.csv
[Wed Aug 15 13:10:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:14 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Aug 15 13:10:14 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Aug 15 13:10:14 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Aug 15 13:11:06 2012] Warning, spatial fit 31 centroid is now closest to src. 12
[Wed Aug 15 13:11:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:11:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:11:06 2012] Assessing source extent using major
[Wed Aug 15 13:11:06 2012] Source does appear to be extended
[Wed Aug 15 13:11:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:11:06 2012] Source is confused with source 18
[Wed Aug 15 17:54:46 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:54:46 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Wed Aug 15 17:54:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Wed Aug 15 17:54:46 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.00"
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src27.ximg exists
[Wed Aug 15 20:19:00 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Aug 15 20:19:00 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_src27 appears to have run properly
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Aug 15 20:19:01 2012] fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Aug 15 20:19:01 2012] Fit fullrun_mos2_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Aug 15 20:19:28 2012] Source 13 is offset by 4.811396 and -3.030657 pixels which is larger than
2 X fitted extent = 0.802795 x 0.802795, not incorporating fit results
[Wed Aug 15 20:19:28 2012] Source 13 is offset by 4.531051 and -7.551645 pixels which is larger than
2 X fitted extent = 1.223297 x 1.223297, not incorporating fit results
[Wed Aug 15 20:19:28 2012] Source 13 is offset by 4.544311 and -8.032818 pixels which is larger than
2 X fitted extent = 1.549871 x 1.549871, not incorporating fit results
[Wed Aug 15 20:19:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:28 2012] Assessing source extent using major
[Wed Aug 15 20:19:28 2012] Source does appear to be extended
[Wed Aug 15 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 00:43:21 2012] XMMSAS src. selection expression = ellipse(25707.891418, 27259.110870, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 00:43:21 2012] Writing source region out to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src13_src.reg
[Thu Aug 16 00:43:21 2012] Extracting stamp from image fullrun_mos2_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (259, 276) - (334, 351)
[Thu Aug 16 00:43:21 2012] XMMSAS bgd. selection expression = annulus(25707.891418, 27259.110870, 1087.500000, 2175.000000, X, Y) && !ellipse(25801.659340, 25536.847200, 1673.088048, 1673.088048, 0.000000, X, Y) && !ellipse(24757.090912, 25113.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.925934, 24921.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.866608, 26238.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.104309, 25350.333313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.040393, 26791.097874, 1561.447783, 925.618107, 90.000000, X, Y) && !ellipse(22782.644000, 26201.300000, 1266.400036, 1266.400036, 0.000000, X, Y) && !ellipse(25714.866000, 26208.386000, 1078.232031, 1078.232031, 0.000000, X, Y) && !ellipse(25030.136780, 26913.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23521.716000, 24107.618000, 1266.816036, 1266.816036, 0.000000, X, Y) && !ellipse(23310.992035, 27228.100128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.079651, 26728.205902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24120.000702, 27674.232666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.898000, 27286.614000, 614.951218, 614.951218, 0.000000, X, Y) && !ellipse(27091.188232, 25009.937317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27208.184753, 26157.544525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.726013, 26478.375610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25151.162000, 27293.434000, 1089.216031, 1089.216031, 0.000000, X, Y) && !ellipse(23032.898000, 22870.684000, 2533.632073, 2533.632073, 0.000000, X, Y)
[Thu Aug 16 00:43:21 2012] Writing fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src13.gif
[Thu Aug 16 00:58:24 2012] Mean detx,y = (1443.12, -2913.92) 
[Thu Aug 16 00:58:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 00:58:34 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 00:58:34 2012] Setting source spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Aug 16 00:58:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Aug 16 01:39:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 01:39:33 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:26:05 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:05 2012] Error reading totcts from fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Aug 16 02:26:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:06 2012] Using photon index=1.80, rate=0.00365, arf fullrun_mos2_xmm0108460101_pi300-10000_pass1_cl_src13.arf
[Thu Aug 16 02:26:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:06 2012] Updating source flux to 3.6e-14
[Thu Aug 16 02:27:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting