[Wed Aug 15 05:12:12 2012] Detection parameters:
  Position = (279.2, 389.6) = 13 41 54.59 26 29 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.2 +/- 9.4
  Background counts = 15.7
  Rate = 0.002 +/- 0.0005

[Wed Aug 15 05:12:13 2012] Off-axis axis estimate = 6.76'
[Wed Aug 15 07:46:35 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:46:35 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Wed Aug 15 07:46:35 2012] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.955
[Wed Aug 15 07:46:35 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.81"
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src45.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src45.csv
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed Aug 15 10:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src45.csv
[Wed Aug 15 10:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed Aug 15 10:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed Aug 15 10:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed Aug 15 10:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:54 2012] Source 8 is offset by 3.704801 and -6.892747 pixels which is larger than
2 X fitted extent = 1.955710 x 1.955710, not incorporating fit results
[Wed Aug 15 13:10:54 2012] Spatial fit model total counts = 282.494000, observed total counts = 251.000000
[Wed Aug 15 13:10:54 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 13:10:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:54 2012] Assessing source extent using major
[Wed Aug 15 13:10:54 2012] Source does appear to be extended
[Wed Aug 15 13:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:10:54 2012] Deleting source due to low Poisson probability 0.9