[Wed Aug 15 05:12:13 2012] Detection parameters:
  Position = (270.2, 274.1) = 13 41 57.48 26 20 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 18.0
  Background counts = 72.4
  Rate = 0.003 +/- 0.0006

[Wed Aug 15 05:12:13 2012] Off-axis axis estimate = 2.70'
[Wed Aug 15 07:46:35 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:46:35 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Wed Aug 15 07:46:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.955
[Wed Aug 15 07:46:35 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.78"
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src31.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src31.csv
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src31.csv
[Wed Aug 15 10:18:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Aug 15 10:18:59 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Aug 15 13:10:54 2012] Source 46 is offset by 4.773799 and -7.071381 pixels which is larger than
2 X fitted extent = 1.839494 x 1.839494, not incorporating fit results
[Wed Aug 15 13:10:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:54 2012] Assessing source extent using major
[Wed Aug 15 13:10:54 2012] Source does appear to be extended
[Wed Aug 15 13:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:39:54 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 15:39:54 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Wed Aug 15 15:39:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.955
[Wed Aug 15 15:39:54 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.78"
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src27.ximg exists
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Aug 15 17:54:44 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src27 appears to have run properly
[Wed Aug 15 17:54:45 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Aug 15 17:54:45 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Aug 15 17:54:45 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Aug 15 20:19:19 2012] Source 46 is offset by 4.768581 and -7.075771 pixels which is larger than
2 X fitted extent = 1.844032 x 1.844032, not incorporating fit results
[Wed Aug 15 20:19:19 2012] Source 46 is offset by -1.669442 and -1.966300 pixels which is larger than
2 X fitted extent = 0.889177 x 0.889177, not incorporating fit results
[Wed Aug 15 20:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:19 2012] Assessing source extent using major
[Wed Aug 15 20:19:19 2012] Source does appear to be extended
[Wed Aug 15 20:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 22:58:17 2012] XMMSAS src. selection expression = ellipse(23460.390533, 23802.299896, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 22:58:17 2012] Writing source region out to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src46_src.reg
[Wed Aug 15 22:58:17 2012] Extracting stamp from image fullrun_mos1_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (233, 237) - (308, 312)
[Wed Aug 15 22:58:17 2012] XMMSAS bgd. selection expression = annulus(23460.390533, 23802.299896, 1087.500000, 2175.000000, X, Y) && !ellipse(25774.023840, 25508.625000, 1870.640054, 1870.640054, 0.000000, X, Y) && !ellipse(25903.714000, 25778.010000, 935.408027, 935.408027, 0.000000, X, Y) && !ellipse(23525.303345, 25004.019257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24102.870000, 26645.582000, 1061.200031, 1061.200031, 0.000000, X, Y) && !ellipse(24683.137726, 26223.774231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23788.026459, 26049.681305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24505.502991, 24059.184601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26443.788544, 26212.649658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24918.970703, 23982.865784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23638.657166, 26478.651733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25482.296234, 26821.291229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.976501, 23880.559540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22758.079529, 25950.805359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.473724, 26018.004150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.054550, 24752.343719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.261749, 23805.363800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.089478, 23290.439453, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 22:58:17 2012] Writing fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src46.gif
[Wed Aug 15 23:14:20 2012] Mean detx,y = (-415.71, 1655.22) 
[Wed Aug 15 23:14:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 23:14:30 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 23:14:31 2012] Setting source spectrum file to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed Aug 15 23:14:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu Aug 16 00:42:30 2012] Not generating rmf since there are only 94 counts
[Thu Aug 16 00:42:30 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:26:03 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:03 2012] Error reading totcts from fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Aug 16 02:26:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:04 2012] Using photon index=1.80, rate=0.00302, arf fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src46.arf
[Thu Aug 16 02:26:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:04 2012] Updating source flux to 3e-14
[Thu Aug 16 02:26:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting