[Wed Aug 15 05:12:12 2012] Detection parameters:
  Position = (282.2, 277.1) = 13 41 53.59 26 21 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.9 +/- 24.6
  Background counts = 81.0
  Rate = 0.007 +/- 0.0008

[Wed Aug 15 05:12:13 2012] Off-axis axis estimate = 1.94'
[Wed Aug 15 07:46:35 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:46:35 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Wed Aug 15 07:46:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Wed Aug 15 07:46:35 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.40"
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src12.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src12.csv
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src12.csv
[Wed Aug 15 10:18:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Aug 15 10:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Aug 15 10:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Aug 15 10:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:54 2012] Warning, spatial fit 12 centroid is now closest to src. 45
[Wed Aug 15 13:10:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:54 2012] Assessing source extent using major
[Wed Aug 15 13:10:54 2012] Source does appear to be extended
[Wed Aug 15 13:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:10:54 2012] Source is confused with source 45
[Wed Aug 15 15:39:54 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 15:39:54 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Wed Aug 15 15:39:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Wed Aug 15 15:39:54 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.40"
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src10.ximg exists
[Wed Aug 15 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Aug 15 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 17:54:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:54:45 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Aug 15 17:54:45 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Aug 15 17:54:45 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Aug 15 20:19:19 2012] Source 44 is offset by -0.614099 and -7.704637 pixels which is larger than
2 X fitted extent = 1.089338 x 1.089338, not incorporating fit results
[Wed Aug 15 20:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:19 2012] Assessing source extent using major
[Wed Aug 15 20:19:19 2012] Source does appear to be extended
[Wed Aug 15 20:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 22:58:17 2012] XMMSAS src. selection expression = ellipse(24505.502991, 24059.184601, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 22:58:17 2012] Writing source region out to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src44_src.reg
[Wed Aug 15 22:58:17 2012] Extracting stamp from image fullrun_mos1_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (245, 240) - (320, 315)
[Wed Aug 15 22:58:17 2012] XMMSAS bgd. selection expression = annulus(24505.502991, 24059.184601, 1087.500000, 2175.000000, X, Y) && !ellipse(25774.023840, 25508.625000, 1870.640054, 1870.640054, 0.000000, X, Y) && !ellipse(25903.714000, 25778.010000, 935.408027, 935.408027, 0.000000, X, Y) && !ellipse(23525.303345, 25004.019257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24102.870000, 26645.582000, 1061.200031, 1061.200031, 0.000000, X, Y) && !ellipse(24683.137726, 26223.774231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23788.026459, 26049.681305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26443.788544, 26212.649658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24895.654000, 27250.780000, 1095.512032, 1095.512032, 0.000000, X, Y) && !ellipse(24918.970703, 23982.865784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23638.657166, 26478.651733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25482.296234, 26821.291229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.976501, 23880.559540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26593.078186, 26731.994629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22758.079529, 25950.805359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24651.224000, 27206.608000, 1169.784034, 1169.784034, 0.000000, X, Y) && !ellipse(23460.390533, 23802.299896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27151.876892, 25104.297058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.473724, 26018.004150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.054550, 24752.343719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.261749, 23805.363800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.638397, 23997.773773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.089478, 23290.439453, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 22:58:17 2012] Writing fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src44.gif
[Wed Aug 15 23:10:31 2012] Mean detx,y = (-264.62, 611.59) 
[Wed Aug 15 23:10:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 23:10:41 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 23:10:42 2012] Setting source spectrum file to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Aug 15 23:10:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Thu Aug 16 00:26:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 00:26:17 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:26:03 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:03 2012] Error reading totcts from fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Aug 16 02:26:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:04 2012] Using photon index=1.80, rate=0.00735, arf fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src44.arf
[Thu Aug 16 02:26:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:04 2012] Updating source flux to 7.3e-14
[Thu Aug 16 02:26:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting