[Wed Aug 15 05:12:12 2012] Detection parameters:
  Position = (487.1, 282.5) = 13 40 47.29 26 21 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.5 +/- 9.6
  Background counts = 15.3
  Rate = 0.001 +/- 0.0003

[Wed Aug 15 05:12:13 2012] Off-axis axis estimate = 13.73'
[Wed Aug 15 07:46:35 2012] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:46:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 07:46:35 2012] Initial guess for spatial extent in simple fitting = 13.29"
[Wed Aug 15 07:46:35 2012] source mask rpix=3.1, npix_max = 50, mask sum = 45, frac = 0.890
[Wed Aug 15 07:46:35 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 13.29"
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src51.ximg exists
[Wed Aug 15 10:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src51.csv
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Aug 15 10:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src51.csv
[Wed Aug 15 10:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Aug 15 10:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Aug 15 10:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Aug 15 10:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:54 2012] Spatial fit model total counts = 184.450000, observed total counts = 125.000000
[Wed Aug 15 13:10:54 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 13:10:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:54 2012] Assessing source extent using major
[Wed Aug 15 13:10:54 2012] Source does appear to be extended
[Wed Aug 15 13:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:10:54 2012] Deleting source due to low Poisson probability 0.9