[Wed Aug 15 05:12:12 2012] Detection parameters:
  Position = (314.2, 185.5) = 13 41 43.24 26 14 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.8 +/- 13.4
  Background counts = 22.6
  Rate = 0.005 +/- 0.0007

[Wed Aug 15 05:12:13 2012] Off-axis axis estimate = 8.27'
[Wed Aug 15 07:46:35 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:46:35 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Wed Aug 15 07:46:35 2012] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.671
[Wed Aug 15 07:46:35 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.56"
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src21.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src21.csv
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src21.csv
[Wed Aug 15 10:18:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Aug 15 10:18:58 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Aug 15 13:10:54 2012] Source 30 is offset by 6.199301 and 4.329754 pixels which is larger than
2 X fitted extent = 1.419968 x 1.419968, not incorporating fit results
[Wed Aug 15 13:10:54 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.778980 pixels away
[Wed Aug 15 13:10:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:54 2012] Assessing source extent using major
[Wed Aug 15 13:10:54 2012] Source does appear to be extended
[Wed Aug 15 13:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:39:54 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 15:39:54 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Wed Aug 15 15:39:54 2012] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.671
[Wed Aug 15 15:39:54 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.56"
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src17.ximg exists
[Wed Aug 15 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src17.csv
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Aug 15 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src17.csv
[Wed Aug 15 17:54:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:54:45 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Aug 15 17:54:45 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Aug 15 17:54:45 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Aug 15 20:19:19 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.225840 pixels away
[Wed Aug 15 20:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:19 2012] Assessing source extent using major
[Wed Aug 15 20:19:19 2012] Source does appear to be extended
[Wed Aug 15 20:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 22:58:17 2012] XMMSAS src. selection expression = ellipse(27290.825195, 16092.138626, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 22:58:17 2012] Writing source region out to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src30_src.reg
[Wed Aug 15 22:58:17 2012] Extracting stamp from image fullrun_mos1_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (277, 148) - (352, 223)
[Wed Aug 15 22:58:17 2012] XMMSAS bgd. selection expression = annulus(27290.825195, 16092.138626, 1087.500000, 2175.000000, X, Y) && !ellipse(24691.259460, 19028.151001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26068.782340, 14736.992600, 489.806414, 489.806414, 0.000000, X, Y)
[Wed Aug 15 22:58:17 2012] Writing fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src30.gif
[Wed Aug 15 23:12:07 2012] Mean detx,y = (8257.54, 1085.73) 
[Wed Aug 15 23:12:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 23:12:23 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 23:12:23 2012] Setting source spectrum file to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Aug 15 23:12:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu Aug 16 00:33:58 2012] Not generating rmf since there are only 90 counts
[Thu Aug 16 00:33:58 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:26:03 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:03 2012] Error reading totcts from fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Aug 16 02:26:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:04 2012] Using photon index=1.80, rate=0.00506, arf fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src30.arf
[Thu Aug 16 02:26:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:04 2012] Updating source flux to 8.5e-14
[Thu Aug 16 02:26:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting