[Wed Aug 15 05:12:12 2012] Detection parameters:
  Position = (278.7, 303.0) = 13 41 54.73 26 22 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 257.0 +/- 26.0
  Background counts = 105.3
  Rate = 0.009 +/- 0.0009

[Wed Aug 15 05:12:13 2012] Off-axis axis estimate = 1.47'
[Wed Aug 15 07:46:35 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:46:35 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Wed Aug 15 07:46:35 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed Aug 15 07:46:35 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.16"
[Wed Aug 15 10:18:56 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src8.ximg exists
[Wed Aug 15 10:18:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src8.csv
[Wed Aug 15 10:18:56 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Aug 15 10:18:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src8.csv
[Wed Aug 15 10:18:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Aug 15 10:18:58 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Aug 15 13:10:54 2012] Source 25 is offset by 0.548277 and -3.754737 pixels which is larger than
2 X fitted extent = 3.463053 x 3.463053, not incorporating fit results
[Wed Aug 15 13:10:54 2012] Source 25 is offset by 0.611835 and -3.976576 pixels which is larger than
2 X fitted extent = 3.012317 x 3.012317, not incorporating fit results
[Wed Aug 15 13:10:54 2012] Spatial fit model total counts = 2030.520000, observed total counts = 2029.000000
[Wed Aug 15 13:10:54 2012] Offset between fit and detection position for source 25 = 2.845415 pixels
[Wed Aug 15 13:10:54 2012] Warning, changing simple spatial fit ID from 8 to 20
[Wed Aug 15 13:10:54 2012] 1994.107000 total counts/ 1849.870000 bgd. counts: snr = 3.353560
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.845415 pixels
  Position = (277.1, 305.4) = 13 41 55.26 26 23 9.0
  Extent = 14.8 (14.7-29.6)", rotation angle = 0
  Source counts = 144.2 +/- 44.7
  Background counts = 1849.9
  Rate = 0.005 +/- 0.002
[Wed Aug 15 13:10:54 2012] Spatial fit model total counts = 1640.400000, observed total counts = 1638.000000
[Wed Aug 15 13:10:54 2012] Offset between fit and detection position for source 25 = 1.995544 pixels
[Wed Aug 15 13:10:54 2012] Warning, changing simple spatial fit ID from 20 to 28
[Wed Aug 15 13:10:54 2012] 1603.429900 total counts/ 1510.620000 bgd. counts: snr = 2.387903
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.995544 pixels
  Position = (277.3, 307.4) = 13 41 55.18 26 23 17.6
  Extent = 14.9 (6.5-29.9)" x 5.7 (1.9-10.5)", rotation angle = 0 (350-0) degrees
  Source counts = 92.8 +/- 40.0
  Background counts = 1510.6
  Rate = 0.003 +/- 0.001
[Wed Aug 15 13:10:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:54 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 13:10:54 2012] Source does appear to be extended
[Wed Aug 15 13:10:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.62
[Wed Aug 15 13:10:54 2012] Source is confused with source 23
[Wed Aug 15 13:10:54 2012] Source is confused with source 27
[Wed Aug 15 13:10:54 2012] Source is confused with source 20
[Wed Aug 15 13:10:54 2012] Source is confused with source 15
[Wed Aug 15 15:39:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 15:39:54 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Wed Aug 15 15:39:54 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.093
[Wed Aug 15 15:39:54 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.31"
[Wed Aug 15 17:54:43 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Aug 15 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src7.csv
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Aug 15 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src7.csv
[Wed Aug 15 17:54:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Aug 15 17:54:44 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Aug 15 20:19:19 2012] Warning, spatial fit 7 centroid is now closest to src. 23
[Wed Aug 15 20:19:19 2012] Spatial fit model total counts = 2712.200000, observed total counts = 2706.000000
[Wed Aug 15 20:19:19 2012] Offset between fit and detection position for source 25 = 0.581809 pixels
[Wed Aug 15 20:19:19 2012] Warning, changing simple spatial fit ID from 7 to 8
[Wed Aug 15 20:19:19 2012] 2673.295000 total counts/ 2482.500000 bgd. counts: snr = 3.829326
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.581809 pixels
  Position = (277.6, 306.8) = 13 41 55.09 26 23 15.3
  Extent = 13.3 (12.0-13.9)", rotation angle = 0
  Source counts = 190.8 +/- 51.7
  Background counts = 2482.5
  Rate = 0.007 +/- 0.002
[Wed Aug 15 20:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 20:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 20:19:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 20:19:19 2012] Source does appear to be extended
[Wed Aug 15 20:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 22:58:17 2012] XMMSAS src. selection expression = ellipse(24102.870000, 26645.582000, 795.900023, 795.900023, 0.000000, X, Y)
[Wed Aug 15 22:58:17 2012] Writing source region out to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src25_src.reg
[Wed Aug 15 22:58:17 2012] Extracting stamp from image fullrun_mos1_xmm0108460101_pi300-10000_cl_sm2.00.img.gz, (232, 261) - (323, 353)
[Wed Aug 15 22:58:17 2012] XMMSAS bgd. selection expression = annulus(24102.870000, 26645.582000, 1326.500038, 2653.000076, X, Y) && !ellipse(25774.023840, 25508.625000, 1870.640054, 1870.640054, 0.000000, X, Y) && !ellipse(25903.714000, 25778.010000, 935.408027, 935.408027, 0.000000, X, Y) && !ellipse(23525.303345, 25004.019257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24683.137726, 26223.774231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23788.026459, 26049.681305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24505.502991, 24059.184601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26443.788544, 26212.649658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24895.654000, 27250.780000, 1095.512032, 1095.512032, 0.000000, X, Y) && !ellipse(24918.970703, 23982.865784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23638.657166, 26478.651733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25482.296234, 26821.291229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.976501, 23880.559540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26593.078186, 26731.994629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22758.079529, 25950.805359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23813.772278, 27250.200592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26320.873962, 27182.051300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24651.224000, 27206.608000, 1169.784034, 1169.784034, 0.000000, X, Y) && !ellipse(23460.390533, 23802.299896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27151.876892, 25104.297058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.473724, 26018.004150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.054550, 24752.343719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23044.762800, 27816.384000, 1127.960032, 1127.960032, 0.000000, X, Y) && !ellipse(26425.261749, 23805.363800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.638397, 23997.773773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.089478, 23290.439453, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 22:58:17 2012] Writing fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src25.gif
[Wed Aug 15 23:09:50 2012] Mean detx,y = (-2709.78, 36.91) 
[Wed Aug 15 23:09:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 23:10:01 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 23:10:01 2012] Setting source spectrum file to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Aug 15 23:10:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu Aug 16 02:26:02 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:03 2012] Error reading totcts from fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Aug 16 02:26:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:04 2012] Using photon index=1.80, rate=0.0069, arf fullrun_mos1_xmm0108460101_pi300-10000_pass1_cl_src25.arf
[Thu Aug 16 02:26:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:04 2012] Updating source flux to 7e-14
[Thu Aug 16 02:26:08 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Thu Aug 16 02:26:08 2012] Flag c found in src. 25 procflags, skipping spectral fitting