[Wed Aug 15 05:12:12 2012] Detection parameters:
  Position = (132.1, 184.4) = 13 42 42.12 26 14 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.8 +/- 9.2
  Background counts = 13.2
  Rate = 0.001 +/- 0.0003

[Wed Aug 15 05:12:13 2012] Off-axis axis estimate = 14.62'
[Wed Aug 15 07:46:35 2012] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:46:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 07:46:35 2012] Initial guess for spatial extent in simple fitting = 13.74"
[Wed Aug 15 07:46:35 2012] source mask rpix=3.2, npix_max = 53, mask sum = 36, frac = 0.672
[Wed Aug 15 07:46:35 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 13.74"
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src52.ximg exists
[Wed Aug 15 10:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src52.csv
[Wed Aug 15 10:18:58 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src52_1.ximg exists
[Wed Aug 15 10:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src52.csv
[Wed Aug 15 10:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Wed Aug 15 10:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Wed Aug 15 10:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Wed Aug 15 10:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:10:37 2012] Warning, spatial fit 9 centroid is now closest to src. 9
[Wed Aug 15 13:10:37 2012] Warning, spatial fit 20 centroid is now closest to src. 23
[Wed Aug 15 13:10:37 2012] Warning, spatial fit 22 centroid is now closest to src. 18
[Wed Aug 15 13:10:37 2012] Warning, spatial fit 33 centroid is now closest to src. 33
[Wed Aug 15 13:10:54 2012] Warning, spatial fit 15 centroid is now closest to src. 20
[Wed Aug 15 13:10:54 2012] Warning, spatial fit 16 centroid is now closest to src. 8
[Wed Aug 15 13:10:54 2012] Spatial fit model total counts = 140.554000, observed total counts = 104.000000
[Wed Aug 15 13:10:54 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 13:10:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:54 2012] Assessing source extent using major
[Wed Aug 15 13:10:54 2012] Source does appear to be extended
[Wed Aug 15 13:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:10:54 2012] Deleting source due to low Poisson probability 0.9