[Wed Aug 15 05:12:12 2012] Detection parameters:
  Position = (283.0, 327.5) = 13 41 53.34 26 24 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.9 +/- 17.0
  Background counts = 100.1
  Rate = 0.003 +/- 0.0006

[Wed Aug 15 05:12:13 2012] Off-axis axis estimate = 2.39'
[Wed Aug 15 07:46:35 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:46:35 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Wed Aug 15 07:46:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Wed Aug 15 07:46:35 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.62"
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src39.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src39.csv
[Wed Aug 15 10:18:57 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Aug 15 10:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src39.csv
[Wed Aug 15 10:18:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Aug 15 10:18:59 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Aug 15 10:18:59 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Aug 15 13:10:54 2012] Source 11 is offset by 1.487865 and 2.299606 pixels which is larger than
2 X fitted extent = 0.841457 x 0.841457, not incorporating fit results
[Wed Aug 15 13:10:54 2012] Source 11 is offset by 6.376785 and -5.524785 pixels which is larger than
2 X fitted extent = 0.875991 x 0.875991, not incorporating fit results
[Wed Aug 15 13:10:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:10:54 2012] Assessing source extent using major
[Wed Aug 15 13:10:54 2012] Source does appear to be extended
[Wed Aug 15 13:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:39:54 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 15:39:54 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Wed Aug 15 15:39:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Wed Aug 15 15:39:54 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.62"
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src31.ximg exists
[Wed Aug 15 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src31.csv
[Wed Aug 15 17:54:44 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Aug 15 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src31.csv
[Wed Aug 15 17:54:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:54:45 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Aug 15 17:54:45 2012] fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Aug 15 17:54:45 2012] Fit fullrun_mos1_xmm0108460101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Aug 15 20:19:19 2012] Spatial fit model total counts = 1103.850000, observed total counts = 1102.000000
[Wed Aug 15 20:19:19 2012] Offset between fit and detection position for source 11 = 0.924753 pixels
[Wed Aug 15 20:19:19 2012] 1087.264500 total counts/ 1067.280000 bgd. counts: snr = 0.611722
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.924753 pixels
  Position = (282.7, 328.4) = 13 41 53.43 26 24 49.1
  Extent = 3.3 (1.9-6.4)", rotation angle = 0
  Source counts = 20.0 +/- 33.0
  Background counts = 1067.3
  Rate = 0.0007 +/- 0.001
  Deleting source due to low Poisson probability