[Tue Jan 17 04:46:55 2012] Detection parameters:
  Position = (325.1, 413.0) = 3 32 26.32 -27 40 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 849.4 +/- 43.4
  Background counts = 80.6
  Rate = 0.01 +/- 0.0005

[Tue Jan 17 04:46:57 2012] Off-axis axis estimate = 8.53'
[Tue Jan 17 04:49:08 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 04:49:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 04:49:08 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Tue Jan 17 04:49:08 2012] source mask rpix=2.5, npix_max = 34, mask sum = 29, frac = 0.829
[Tue Jan 17 04:49:08 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.69"
[Tue Jan 17 05:52:02 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jan 17 05:52:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 05:52:02 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jan 17 05:52:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 05:52:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 05:52:02 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 05:52:02 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 05:52:02 2012] Fit fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 07:46:06 2012] Source 3 is offset by -7.465284 and -3.621412 pixels which is larger than
2 X fitted extent = 1.199246 x 1.199246, not incorporating fit results
[Tue Jan 17 07:46:06 2012] Spatial fit model total counts = 3261.900000, observed total counts = 3258.000000
[Tue Jan 17 07:46:06 2012] Offset between fit and detection position for source 3 = 0.747162 pixels
[Tue Jan 17 07:46:06 2012] 2694.498000 total counts/ 2487.650000 bgd. counts: snr = 4.147216
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.747162 pixels
  Position = (325.8, 413.3) = 3 32 26.10 -27 40 35.5
  Extent = 3.5 (3.1-4.3)", rotation angle = 0
  Source counts = 206.8 +/- 51.9
  Background counts = 2487.7
  Rate = 0.003 +/- 0.0006
[Tue Jan 17 07:46:06 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 07:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 07:46:06 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 07:46:06 2012] Source does appear to be extended
[Tue Jan 17 07:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:46:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 07:46:33 2012] Initial guess for spatial extent in simple fitting = 3.49"
[Tue Jan 17 07:46:33 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.589
[Tue Jan 17 07:46:33 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.49"
[Tue Jan 17 09:01:15 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan 17 09:01:15 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan 17 09:01:15 2012] Fit fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jan 17 09:01:16 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 09:01:16 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 09:01:16 2012] Fit fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 11:54:41 2012] Spatial fit model total counts = 3259.000000, observed total counts = 3259.000000
[Tue Jan 17 11:54:41 2012] Offset between fit and detection position for source 3 = 0.046844 pixels
[Tue Jan 17 11:54:41 2012] 2738.434000 total counts/ 2540.090000 bgd. counts: snr = 3.935451
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.046844 pixels
  Position = (325.8, 413.3) = 3 32 26.09 -27 40 35.6
  Extent = 3.5 (3.0-4.2)", rotation angle = 0
  Source counts = 198.3 +/- 52.3
  Background counts = 2540.1
  Rate = 0.002 +/- 0.0007
[Tue Jan 17 11:54:41 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:54:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:54:41 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 11:54:41 2012] Source does appear to be extended
[Tue Jan 17 11:54:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 11:55:17 2012] XMMSAS src. selection expression = ellipse(28298.170940, 35906.586800, 208.590006, 208.590006, 0.000000, X, Y)
[Tue Jan 17 11:55:17 2012] Writing source region out to fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src3_src.reg
[Tue Jan 17 11:55:17 2012] Extracting stamp from image fullrun_pn_xmm0108062301_pi300-10000_cl_sm2.00.img.gz, (314, 401) - (338, 425)
[Tue Jan 17 11:55:17 2012] XMMSAS bgd. selection expression = annulus(28298.170940, 35906.586800, 347.650010, 695.300020, X, Y) && !ellipse(28061.538360, 35282.058200, 485.526414, 375.564011, 359.946000, X, Y) && !ellipse(28805.073364, 34959.553406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.684662, 34603.686554, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 11:55:17 2012] Writing fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src3.gif
[Tue Jan 17 11:58:29 2012] Mean detx,y = (-4167.29, -8301.19) 
[Tue Jan 17 11:58:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 11:58:45 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 11:58:45 2012] Setting source spectrum file to fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan 17 11:58:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jan 17 15:53:46 2012] Updating aperture counts using extracted products
[Tue Jan 17 15:53:46 2012] Error reading totcts from fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan 17 15:53:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 15:53:48 2012] Using photon index=1.80, rate=0.00248, arf fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src3.arf
[Tue Jan 17 15:53:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 15:53:48 2012] Updating source flux to 2.1e-14
[Tue Jan 17 15:56:45 2012] Flag b found in src. 3 procflags, skipping spectral fitting