[Tue Jan 17 04:46:55 2012] Detection parameters:
  Position = (323.3, 406.1) = 3 32 26.92 -27 41 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2953.9 +/- 66.8
  Background counts = 82.8
  Rate = 0.07 +/- 0.002

[Tue Jan 17 04:46:57 2012] Off-axis axis estimate = 8.01'
[Tue Jan 17 04:49:08 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 04:49:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 04:49:08 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Tue Jan 17 04:49:08 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Tue Jan 17 04:49:08 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.43"
[Tue Jan 17 05:52:02 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jan 17 05:52:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src2.csv
[Tue Jan 17 05:52:02 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jan 17 05:52:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src2.csv
[Tue Jan 17 05:52:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 05:52:02 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jan 17 05:52:02 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jan 17 05:52:02 2012] Fit fullrun_pn_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jan 17 07:46:06 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Tue Jan 17 07:46:06 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 07:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 07:46:06 2012] Assessing source extent using major
[Tue Jan 17 07:46:06 2012] Source does appear to be extended
[Tue Jan 17 07:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:46:33 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 07:46:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 07:46:33 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Tue Jan 17 07:46:33 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Tue Jan 17 07:46:33 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.43"
[Tue Jan 17 09:01:15 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jan 17 09:01:15 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jan 17 09:01:15 2012] Fit fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jan 17 09:01:16 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jan 17 09:01:16 2012] fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jan 17 09:01:16 2012] Fit fullrun_pn_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jan 17 11:54:41 2012] Spatial fit model total counts = 3808.130000, observed total counts = 3816.000000
[Tue Jan 17 11:54:41 2012] Offset between fit and detection position for source 2 = 0.172010 pixels
[Tue Jan 17 11:54:41 2012] 3825.370000 total counts/ 1973.720000 bgd. counts: snr = 41.678888
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.172010 pixels
  Position = (323.1, 406.1) = 3 32 26.98 -27 41 6.9
  Extent = 6.1 (5.8-6.4)" x 4.7 (4.4-4.9)", rotation angle = 360 (360-0) degrees
  Source counts = 1851.7 +/- 61.8
  Background counts = 1973.7
  Rate = 0.02 +/- 0.0008
[Tue Jan 17 11:54:41 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:54:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:54:41 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 11:54:41 2012] Source does appear to be extended
[Tue Jan 17 11:54:41 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Tue Jan 17 11:55:17 2012] Counts = 1851.650000, rescaling region sizes by 2.000000
[Tue Jan 17 11:55:17 2012] XMMSAS src. selection expression = ellipse(28061.538360, 35282.058200, 728.289621, 563.346016, 359.946000, X, Y)
[Tue Jan 17 11:55:17 2012] Writing source region out to fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src2_src.reg
[Tue Jan 17 11:55:17 2012] Extracting stamp from image fullrun_pn_xmm0108062301_pi300-10000_cl_sm2.00.img.gz, (281, 364) - (365, 448)
[Tue Jan 17 11:55:17 2012] XMMSAS bgd. selection expression = annulus(28061.538360, 35282.058200, 2427.632070, 4855.264140, X, Y) && !ellipse(28298.170940, 35906.586800, 278.120008, 278.120008, 0.000000, X, Y) && !ellipse(27246.953491, 29919.375885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32179.950134, 39969.893707, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25072.444672, 36821.060822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33137.831604, 39513.199463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32347.702850, 31467.510193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23919.147736, 38651.098175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26087.080000, 37557.283600, 460.168149, 460.168149, 0.000000, X, Y) && !ellipse(28805.073364, 34959.553406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.684662, 34603.686554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31638.433014, 33346.625763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30701.228912, 32919.933350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32447.923772, 32775.543817, 500.576314, 413.439218, 90.000000, X, Y)
[Tue Jan 17 11:55:17 2012] Writing fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src2.gif
[Tue Jan 17 11:57:03 2012] Mean detx,y = (-4059.18, -7682.47) 
[Tue Jan 17 11:57:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 11:58:13 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 11:58:14 2012] Setting source spectrum file to fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 11:58:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jan 17 15:53:46 2012] Updating aperture counts using extracted products
[Tue Jan 17 15:53:46 2012] Error reading totcts from fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 15:53:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 15:53:48 2012] Using photon index=1.80, rate=0.0231, arf fullrun_pn_xmm0108062301_pi300-10000_pass1_cl_src2.arf
[Tue Jan 17 15:53:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 15:53:48 2012] Updating source flux to 9.6e-14